584,837 active members*
5,370 visitors online*
Register for free
Login
Results 1 to 9 of 9
  1. #1
    Join Date
    Oct 2006
    Posts
    78

    Mitutoyo touch signal probe

    Hi all,
    can anyone please help with connection data --pin outs / operating voltage--anything?
    for a mitutoyo touch signal probe no.902329

    Thanks bert

  2. #2
    Join Date
    Jun 2005
    Posts
    14

    mtp1 probe info

    for wiring, with the probe tip facing down, and the connector facing you, the upper left and bottom right pins are an NC switch. the remaining two pins are for the led.

  3. #3
    Join Date
    Dec 2008
    Posts
    3

    Question I have the same probe but I think a different socket

    Quote Originally Posted by bfreedland View Post
    for wiring, with the probe tip facing down, and the connector facing you, the upper left and bottom right pins are an NC switch. the remaining two pins are for the led.
    Uhhh...
    Hmmm.. my probe doesn't have an upper left / lower right...

    it has a sort of upside down 'Y" shaped socket, see below...
    (ignore the hyphen characters "-", used as spacers)

    up (shaft)

    ---O-
    ---O-
    -O- -O-

    down (probe)


    any ideas...????
    Thanks in advance
    john
    (flame2)

  4. #4
    Join Date
    Sep 2004
    Posts
    4
    If you are still looking for information, I have a PDF of the original manual.

    I can tell you that it's a conductive probe, which means that the circuit is closed by a signal passing thru the tip to a conductive item which you are probing, back thru the frame of the machine, etc.

    On the DIN plug connector (end of the cable not plugged into the probe), P1 and P3 are used, P2 and P4 are not used. P1 connects to the shank of the probe, P1 connects to its tip. When the tip couches the work piece it therefore closes the circuit between P1/P3.

    Let me know if you want a copy of the manual.

    Carl

  5. #5
    Join Date
    Oct 2006
    Posts
    78
    Thanks for the info Carl. I would like a copy of the manual. Can you post the pdf. here or send me a copy.. [email protected].
    Bert

  6. #6
    Join Date
    Dec 2008
    Posts
    3

    Yes please the PDF manual

    Have been in calif for a while & just got back...

    Yes please email the PDF manual

    you can direct it to: [email protected]

  7. #7
    Join Date
    Feb 2014
    Posts
    3

    Re: Mitutoyo touch signal probe

    I see this is a pretty old post but I have one of those Mitutoyo touch signal Probes too. I can't figure it out. It only has 2 wires and it is not a simple NC or NO switch unless it is broken. I got it off EBAY and it looks perfect. If any of you guys has any info I would greatly appreciate it.

    Thanks
    Bart

  8. #8
    Join Date
    Sep 2015
    Posts
    11

    Re: Mitutoyo touch signal probe

    Hi Carl,
    I got a similar Mitutoyo touch probe (902431). I don't finde any information, please send me the .pdf manual, thank you very much. My email: [email protected]
    Elek

  9. #9
    Join Date
    Nov 2006
    Posts
    1

    Re: Mitutoyo touch signal probe

    Looking also, If I get a version I will hopefully host a link.

Similar Threads

  1. Renishaw MP-10 Probe, Start Signal
    By mflux_gamblej in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 03-28-2014, 07:04 PM
  2. Replies: 12
    Last Post: 06-05-2013, 06:05 PM
  3. Probe signal loss with USB pendant?
    By revwarguy in forum Mach Software (ArtSoft software)
    Replies: 0
    Last Post: 02-01-2010, 11:17 PM
  4. using a mitutoyo mtp1 signal probe
    By bfreedland in forum Digitizing and Laser Digitizing
    Replies: 4
    Last Post: 09-07-2007, 05:28 PM
  5. Macro for a probe signal
    By mcash3000 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 04-11-2006, 07:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •