Part will be made from 6061 aluminum, machinest supplied. I need a quote for 25 pcs. Will be a reoccuring order of same amount or more.
Part will be made from 6061 aluminum, machinest supplied. I need a quote for 25 pcs. Will be a reoccuring order of same amount or more.
tom whats the overall height of the part?
Hello Tim,
I would rather send you a private message with quote, but you have no private message link. We can machine these for you for $12.13/ea. This is based on the assumption that the length of the part is roughly 1.5". Please contact me with any questions you may have, or to discuss this quotation in more detail. Thank you.
Regards,
Philip Confalone
Macining Concepts
Phone: 631-431-5650
Fax: 631-864-2581
E-mail: [email protected]
Philip Confalone
Machining Concepts
Im going to guess OAL .972 ... I have a live axis cnc lathe with 2" through spindle w/ sync sub in my shop that has some open time.
Medical, Aerospace and Communications are just a few of the high-tech industries we service, if you are interested send me a private message for your RFQ.
Hello Tim
I sent you a personal message with a quote.
Thanks
Hello Tim :wave:
I just PM'd you with our quote on the 25x backplate.
Thank you!
The qoute has been filled. Thank you to all that had submitted!!