585,589 active members*
3,460 visitors online*
Register for free
Login
Page 20 of 90 1018192021223070
Results 381 to 400 of 1793
  1. #381
    Join Date
    Sep 2006
    Posts
    104
    I get about 109 parts but not too sure about a couple.

  2. #382
    Join Date
    Jun 2004
    Posts
    6618
    My guess is 115.
    Lee

  3. #383
    Join Date
    Sep 2003
    Posts
    1469
    My guess 112.
    Thanks

  4. #384
    Join Date
    Feb 2005
    Posts
    25

    my guess

    I would say 99

  5. #385
    Join Date
    Mar 2007
    Posts
    51
    Gotta go with 109. Great product!!!

    Brent
    If it's already been done, then it ain't NO FUN!

  6. #386
    Join Date
    Mar 2007
    Posts
    73
    I say 113. And after trying to count them in such a small space I have a new respect for you for soldering them all.

    Kenith

  7. #387
    Join Date
    Jan 2006
    Posts
    2985
    I've got 139, dang thats a lot of parts.

    Thanks for the chance.

    Matt

  8. #388
    Join Date
    Mar 2007
    Posts
    73
    I just edited mine because I accidentally hit the 4 instead of the 3. In to big of a hurry to be the first to post my answer. Hope this didn't disqualify me since no one posted another guess in the 3 minutes that it took me to notice and edit.

    There were no guesses when I first started counting and already 6 guesses by the time I finished counting. Curious to see how many more by the time I type this.

    By the way, Marcus, if no one gets the correct answer will the closest ones win?

  9. #389
    Join Date
    Apr 2005
    Posts
    1778
    My guess is 114 parts.

    Alan

  10. #390
    Join Date
    Jan 2007
    Posts
    467
    The closest answer will win, regardless if it is the exact number or not. Because it was not explicitly stated in the rules, there is no editing of answers. Any and all edited answers will be disqualified aside from wolfdagons because the rule was not posted by then. I will edit the original rules post to reflect this change.

    -Marcus Freimanis

  11. #391
    Join Date
    Aug 2007
    Posts
    29
    By reading the past few pages and checking Digikey's catalog, I figure there are 112 parts, and since the rules state a tie wins, that's my entry.

    Bob Hayes

  12. #392
    Join Date
    Jan 2008
    Posts
    32
    I guess 138 but I'm haggling over whether to include the header pin in that since it's not a component as in actvie/passive but a connector, 139 is taken so I'll stick with 138!

  13. #393
    Join Date
    Dec 2005
    Posts
    430
    103

    that is my final answer

  14. #394
    Join Date
    Mar 2006
    Posts
    427
    Im going with 92

  15. #395
    Join Date
    Dec 2005
    Posts
    430
    so do we win the "cheap drives" or the "super cheap" drives?

  16. #396
    Join Date
    Jan 2006
    Posts
    2985
    Quote Originally Posted by skmetal7 View Post
    so do we win the "cheap drives" or the "super cheap" drives?
    thats "dirt cheap" to you, heck I'll take either. :banana:

    Matt

  17. #397
    Join Date
    Jul 2003
    Posts
    276
    My answer is 106

  18. #398
    Join Date
    Dec 2007
    Posts
    33
    98 would be my count (guess)

  19. #399
    Join Date
    Jan 2007
    Posts
    467
    This is for the cheap drive, with the mini 12-pin connector and little heatsink plate. The super cheap drive just wouldn't be motivation enough to even begin to count, now would it? ;-)

    -Marcus

  20. #400
    Join Date
    Dec 2005
    Posts
    430
    roger that!

Page 20 of 90 1018192021223070

Similar Threads

  1. Avoid Teknic drives, they are cheap for a reason....
    By ckm in forum Servo Motors / Drives
    Replies: 22
    Last Post: 06-21-2016, 12:27 AM
  2. Interact Bosch servo drives for cheap!!!!!!
    By Interact77 in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 02-02-2010, 12:29 AM
  3. AMC drives
    By ka67_72 in forum Servo Motors / Drives
    Replies: 4
    Last Post: 03-10-2007, 01:38 PM
  4. Replies: 1
    Last Post: 07-24-2005, 12:31 AM
  5. can you ID these drives
    By SJ781 in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 04-28-2004, 03:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •