[acerocket]

I have two parts of a larger project I am working on but do not have the ability to do knurling.

The first part is a 6061 aluminum thumb screw (red anodized). Thread is 1/4-20 and the head has a female knurled pattern. I need the knurl pattern to be as close as possible to that shown in the attached picture.

The second part is a brass knob. It is internally threaded with 1/4-20 and has a male knurled pattern. Again, it is important that the pattern be as close to the attached picture.

If you can do the red anodizing also, I'd like that quoted but as a seperate quote from the machining.

I am attaching .igs files and pictures in a zipped folder.

Looking for a price to do 25, 50 and 100 of each.

Please feel free to contact me via PM or post here if you need additional information.

Thank You

[acerocket]

A PM question asked if I was turning the blanks and looking just for the knurling. No, I am looking for someone to make the entire piece.

[Dualkit]

It seems this is an Esprit drawing I cannot open, is it just me having trouble?
I can open PDF, DXF, DWF, but not this one, if I am not the only one having trouble can you convert it to something more popular?

[acerocket]

A few other people have had troubles so here are some dimensioned .pdfs.

[larry53]

Is this RFQ closed?