Originally Posted by
msdltd
I have a problem where the machine will power up as normal, the machine references as normal, I can then rapid the saddle, load a program etc but the spindle will not start.
You can hear the brake release when the start button is pressed.
The rpm comes up on the screen as I turn the chuck manually.
I can manually operate the contactor and the motor runs.
Guard relays show all lights as they should
On the AUF board LED D11 is solid on and D12 is pulsing?? any ideas?? Please
I would suggest you start another thread with some specific info on the machine in question. We have three ez-path lathes and they are all a bit different, the powerpath is a totally different animal.
"those who would sacrifice liberty for security deserve neither" Benjamin Franklin