When machine is trying to boot,hang up at
C:\VMDCPRMS.SYS.
The control is looking for version 3.2
If some one have this version,please let me now?
When machine is trying to boot,hang up at
C:\VMDCPRMS.SYS.
The control is looking for version 3.2
If some one have this version,please let me now?
That is BMDCPRMS.SYS and if you have your back up disk, it is probably on it. Still the orient and tool change height may need to be set as well as other parameters.
George
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)