Hi, looking for the wiring diagram (s) for the small relay cabinet. My J 310 came with
pages 1-7, 11, and 12. Not sure if missing 8,9, and or 10. "3S' doesn't have them, Dan Thorsen is looking, but no luck as of yet.
Hi, looking for the wiring diagram (s) for the small relay cabinet. My J 310 came with
pages 1-7, 11, and 12. Not sure if missing 8,9, and or 10. "3S' doesn't have them, Dan Thorsen is looking, but no luck as of yet.
My Tree Journeyman 310 just arrived on the truck this morning. This is my first mill so I'm pretty excited. In the cabinet I found schematic pages 1-4,6,7,11 which I thought covered everything that Tree would interfaced to the controller. Can you tell me what's shown on pages 5 and 12?
Thanks
p. 5 X axis servo drive (similiar to p.6 , Y/Z axis)
p. 12 Side Panel Layout Shows a few transformers, CRE relays,MSI, and a fuse block. No wiring, just block diagrams of components.
The sheets I have are old and fragile so I scanned them at my local Kinko's. If you're interested in scanning your sheets 5 and 12 I'll send you the scans for the sheets I have. Maybe someone on the forum can join in and provide the other missing sheets
I also have some other electrical issues with the machine that I've posted over here...
http://www.cnczone.com/forums/showthread.php?t=52250