I would greatly apreciate if someon out there can help me with progamming some oil grooves on the I.d. and face of a steel bushing. The grooves are mirrored one is left hand and the other is right hand and the face groove starts in the same place one of the i.d grooves starts. I have 3 different makes of CNC lathes Mazak Quick turn with 640T nexus control, Mori Seiki SL250 with Fanuc MSC518TC controls and Deawoo Puma with Fanuc 21I-TB controls. If anyone Knows anything that can help me I would greatly apreciate it. Attachment in PDF format Please Help.