I just picked up a DYNA MYTE 2400 Mill and would like to get some info on it any help woul be great
Bill
I just picked up a DYNA MYTE 2400 Mill and would like to get some info on it any help woul be great
Bill
Good little CNC mill. Prettyy straight forward to program from the keypad or by transferring a program from a suitable PC (with a RS232 serial port). Do you have the manual? RS232 transfer program?
Jim
I will need the manual and PC software since the external control panel is missing If you could guide me to where to get these I would appreicate it
Thanks
Bill
I can send you a pdf copy of the manual and the software. Click on my user name above (you have to be logged in) and send me a private email with your email address and I'll send you a copy of each.
As for the controller, you need to contact the manufacturer (most expensive option), check on eBay or do a search on this site (or post a thread with what you want), as several have converted their Dyna 2400 to Mach 3 and may have a controller for sale.
Jim
Hi. i have a DM2400 that i am trying to adapt to a bob campbell breakout board to use with Mach3 s/w. Anyone have a DM2400 driver board schematic?