I purchased an old ( late 80s ?) NEF 480 Lathe. It has a dead i/o board. will not power up. when I powered up the machine, the power section ( main resistors/diodes etc where power comes in) got very hot- the main resistor (white ceramic) was glowing :-( - I would like to get the machine working in it's original form but will consider updating the controls. Any one up for a challenge?
Willling to hire a tech to come in an do an evaluation. I'm in Los Angeles...
Results 1 to 2 of 2
-
03-04-2008, 02:53 PM #1
Registered
- Join Date
- Mar 2007
- Posts
- 9
gildemeister nef 480 lathe- HELP !
-
09-01-2010, 06:41 PM #2
Benutzer
- Join Date
- Jul 2003
- Posts
- 69
Good day dmelacom, I'm looking at purchasing a Gildemeister NEF 480, the machine looks like it is in great condition but the old control I understand is a real pain. The current owner has to manually input his programs, no RS-232 capabilities. I was wondering how you made out on your machine.
Thanks,
Ed
Reply With QuoteSimilar Threads
-
Gildemeister CNC-Lathe NEF 480
By pestana1957 in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 09-01-2010, 06:48 PM -
gildemeister lathe
By roni21702 in forum DNC Problems and SolutionsReplies: 2Last Post: 03-08-2010, 06:09 PM -
GiLdemeister Fanuc NEF 480 - HELP!
By dmelacom in forum FanucReplies: 1Last Post: 05-20-2008, 05:01 AM -
CNC lathe Gildemeister NEF 480
By pestana1957 in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 05-18-2008, 02:34 AM
Posting Permissions
