Originally Posted by
looking9
The material could be any metal which could be easily milled, like: stainless steel, aluminum, copper or brass. The tolerance is like ±10% of the dimension in my drawings. I also attached my drawing.
Thanks a lot.
Stick with the brass.
Is there a research machine shop at your university?
Or one at a nearby University that you could use?
I'm only asking because this is the type of work I've done with a medical school research machine shop and now with the engineering school machine shop. Sorry, I can't quote on outside work and we don't have a high speed spindle anyway.
...again, stick with the brass.
Scott
I can create a Solidworks model for you, no cost. version 2007.
Some of my best finds were in the trash....