[tgnabor]

Hello Mulder25,
My name is Tom in Phoenix, I have a Puma 240 with a Fanuc 21i-TB.
I am looking for maintenance, operator, and programming manuals.
Any help would be great, Thanks in advance.
TGN

[tgnabor]

Hi mulder25,
I just sent you a request for maintenance and operator manuals dor doosan Puma 240 with Fanuc 21i-TB but I forgot to give my email address
so here it is.
[email protected]
Once again, thanks very much
Tom N in Phoenix
ps. PDF would be great

[dhardt]

These manuals are available from the Doosan Parts Department.

[khushankenterprise]

I have a manual in pdf I can try to email if you like.

Dear,

I am having a Doosan Turning center having model number 300 L with Fanuc 21i-TB controller and year of manufacturing is March 2009.
I need a ladder back for this machine. It will be very helpful If any one can support me for the same.

Kindly mail the ladder to below mentioned mail
[email protected]

[sting007]

I have a manual in pdf I can try to email if you like.

I need the ladder manual for Puma 240
[email protected]