recently bought a small hurco turret mill with the ultipath control. anyone in the heathrow airport area know how to program it, and willing to do a short training course at a reasonable rate.
keith
recently bought a small hurco turret mill with the ultipath control. anyone in the heathrow airport area know how to program it, and willing to do a short training course at a reasonable rate.
keith
Sorry I'm way west but maybe can help. Ultipath is basically a scaled down version of the Ultimax control. Almost all the programming steps are the same. There are some minor differences which should not hinder you if you can grasp the Ultimax techniques. There are a few members who may have an old Ultimax manual. I'll look and see if I have any Ultipath files when I return to my office next Thursday. If I do I'll let you know.
ML97
hi thanks for the help
Send an E-mail to [email protected] they can send or sell you the programming manual for the Ultipath control.
Brock
I sell a manual that I use to train with. I can send you a page from it. I have sold close to 20 of them here and been using it to train over 100 people with. I do on site training also (I am in the US). I use to be Hurco's Senior Application Engineer for several years and desided to make my own manual. Send me an email to this address and I will send you a sample page [email protected] I have other products to improve your Hurco also.
Jetski (alias Tooling and Engineering Czar)
"I may not have the keys to success.. but I have learned to pick the locks"