584,849 active members*
4,307 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2004
    Posts
    25

    Thermal Dynamics 4Xi

    Hi All

    Dose any one have any info on a Thermal Dynamics Dynapak 4Xi? I have just bought one to go on a 4`x 4` Table im making but its not working properly I have all lights working and a set/run switch that dose something, it came with out any instructions, so I have no idea what it dose, this being my first plasma.

    If I press trigger when its swiched to "RUN" I get air and HF I also get a small blueish "flame" and all lights on, the air runs on for a few moments after I release it and thats it,

    If any one has any instructions or a wiring diagram that could be scanned and emailed, or better still af any one has any idea what could be wrong with it

    any info on it would be appreciated

    Thanks

    Steve

    Im sorry if I have put this in the wrong forum please move to correct place
    Steve

  2. #2
    Join Date
    Apr 2007
    Posts
    641
    I had the same problem with mine.
    Maybe is noise, Have you conected the PC and electronics from the same line of the plasma? If so the HF will stop the plasma from the PC. Get a long extension and conect the PC and electronics from other line. Also gorund the plasma alone (1.20mts rod ),other for the table and the ground for the E. and PC, from the building should not have interference or better have another copper rod.
    TherLuismal dynamics starts different from other plasmas , the first fire takes longer time , then you have to put that delay (or preheat) time in the cam program.

Similar Threads

  1. thermal dynamics cutmaster 51 help
    By ringomike in forum Waterjet General Topics
    Replies: 14
    Last Post: 01-29-2016, 06:19 AM
  2. THC polarity - Thermal Dynamics SL100
    By cnccolorado in forum Torchmate
    Replies: 0
    Last Post: 02-03-2008, 04:22 AM
  3. Thermal dynamics extended tips cut vs Hypertherm fine cut
    By Mini-MillX2 in forum Waterjet General Topics
    Replies: 3
    Last Post: 07-01-2007, 05:41 PM
  4. Thermal Dynamics Cutmaster 101
    By tuknrm in forum Waterjet General Topics
    Replies: 8
    Last Post: 11-19-2006, 10:52 PM
  5. Start delay on Thermal Dynamics 151
    By Scratch in forum Waterjet General Topics
    Replies: 4
    Last Post: 06-01-2006, 05:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •