584,826 active members*
5,000 visitors online*
Register for free
Login
Page 1 of 2 12
Results 1 to 20 of 29
  1. #1
    Join Date
    Jul 2005
    Posts
    54

    Need file Fanuc 18Mc Nc-basic

    hi,
    My machine 2002 Model 18 Mc
    we need Sram file Nc-basic
    please send very urgent.

  2. #2
    Join Date
    Jan 2006
    Posts
    121
    Hello
    SRAM file is not the same as FROM file(NC Basic). SRAM file stores your parameter settings, PMC settings, programs etc. NC Basic is the operating system software for 18MC control.
    If you are looking for FROM file NC-Basic, you need to know what series software you originally have on this control (such as BDxx). Please refer to Fanuc datasheet that comes with your machine. On the other hand it is almost impossible to get SRAM file for your particular machine since parameters are unique to your machine (unless someone has an identical machine with same control and can do SRAM backup for you).

  3. #3
    Join Date
    Jan 2009
    Posts
    22
    Hello !

    NC Basic file is firmware of basic system.
    This file is protected by Fanuc.co .
    Except Fanuc.co , I don't known who can remove it.

    Also ,I try to backup it ,but it warm me protected.
    Have anyone know how to backup it and how to enter the service mode?

  4. #4
    Join Date
    Jan 2007
    Posts
    48

    I have some bakups for 18 controls completed wats is your machine.
    you need all nc files?
    my mail is [email protected].

  5. #5
    Join Date
    Jan 2009
    Posts
    22
    Dear Willydke

    Yes , I do.
    now ,I have send a Email to your address.
    look for your strong support!
    thank u very much!

  6. #6
    Join Date
    Dec 2011
    Posts
    18

    Re: Need file Fanuc 18Mc Nc-basic

    hi anyone knows how to save nc.basic files (system files) of fanuc18i-mb?

  7. #7
    Join Date
    Jan 2007
    Posts
    48

    Re: Need file Fanuc 18Mc Nc-basic

    I have

  8. #8
    Join Date
    Mar 2010
    Posts
    72

    Re: Need file Fanuc 18Mc Nc-basic

    HI
    I NEED NC BASIC FILE FOR FANUC OI-MC
    PLEASE ANYBODY CAN HELP ME?

  9. #9
    Join Date
    Oct 2014
    Posts
    137

    Re: Need file Fanuc 18Mc Nc-basic

    What file you search for? Please, tell me the series/version of Base software and filename.

  10. #10
    Join Date
    Oct 2009
    Posts
    297

    Re: Need file Fanuc 18Mc Nc-basic

    Quote Originally Posted by cic108 View Post
    HI
    I NEED NC BASIC FILE FOR FANUC OI-MC
    PLEASE ANYBODY CAN HELP ME?
    Why would you need this file? Did you erase it?
    What type of machine do you have?

    Regards

    AlexFanuc

  11. #11
    Join Date
    Mar 2010
    Posts
    72

    Re: Need file Fanuc 18Mc Nc-basic

    Hi
    Thanks for the reply. I have a Bridgeport machine with Fanuc oi-mc control. Every time when I power ON the machine the system goes to "SYSTEM MONITOR MAIN MENU" and an alarm blinks "ROM PARITY ERROR:NC BASIC"

    I don't know how this file erased from the system accidentally? But when I go for the backup I found there are two files still in the system
    SRAM1_0A.FDB
    SRAM1_0B.FDB

    Please help to recover the system so that i can start the machine. Please see the attached picture for the details of the control and software version.

    Thank you very much

  12. #12
    Join Date
    Mar 2010
    Posts
    72

    Re: Need file Fanuc 18Mc Nc-basic

    Pictures of "SYSTEM DATA CHECK"
    Attached Thumbnails Attached Thumbnails WhatsApp Image 2020-12-23 at 11.16.20 AM.jpg   WhatsApp Image 2020-12-23 at 11.16.20 AM (1).jpg  

  13. #13
    Join Date
    Dec 2009
    Posts
    947

    Re: Need file Fanuc 18Mc Nc-basic

    omg ,no system files, i think someone push the flash rom initalisation.
    you need complete files from system
    the problem you will get on the option file and fater that you will need to certificate the controller.
    is better to involved Fanuc if you want a wasy and clean fix
    i do not know about your sram,hope is ok,if not you will need the cnc paramaters and the pmc paramters to load .
    good luck

    PS:You should say to us what you did before or what other did.

  14. #14
    Join Date
    Oct 2009
    Posts
    297

    Re: Need file Fanuc 18Mc Nc-basic

    Quote Originally Posted by cic108 View Post
    Pictures of "SYSTEM DATA CHECK"
    Hello:

    So you lost all software files. You need more than 10 files. Do you have the DATA SHEET of the FANUC control? In the DATA sheet we can find what Main Pcb the control has, and all of the PCB inside the control.
    Make a copy of the SRAM files.
    Maybe you have a Hardware problem, that is why you cannot see any "ROM files".
    Do you know what happened to the machine? It is very difficult for someone to erase the files unless they know how to do it. This is why I am thinking you have a hardware problem.

    Regards

    AlexFanuc

  15. #15
    Join Date
    Mar 2010
    Posts
    72

    Re: Need file Fanuc 18Mc Nc-basic

    Ohh. What to do now? How can I get system files?
    Please help me

  16. #16
    Join Date
    Mar 2010
    Posts
    72

    Re: Need file Fanuc 18Mc Nc-basic

    Dear alexfanuc and zavateandu
    Thank you for your reply. Actually, my brother got some alarm and restart the machine by pressing (P+Q+CANCEL) keys. He is saying that after restart this screen comes out and files are erased.
    Now, what do you think? How can I fix this?
    Can anybody send me the system files? while two backup files (SRAM1_0A.FDB) and (SRAM1_0B.FDB) are still in the memory!!!

    Thanks

  17. #17
    Join Date
    Oct 2009
    Posts
    297

    Re: Need file Fanuc 18Mc Nc-basic

    Quote Originally Posted by cic108 View Post
    Ohh. What to do now? How can I get system files?
    Please help me
    Hello:

    Would you please take a photograph of the "yellow box" behind the display?

    Regards

    AlexFanuc

  18. #18
    Join Date
    Dec 2009
    Posts
    947

    Re: Need file Fanuc 18Mc Nc-basic

    Quote Originally Posted by cic108 View Post
    Dear alexfanuc and zavateandu
    Thank you for your reply. Actually, my brother got some alarm and restart the machine by pressing (P+Q+CANCEL) keys. He is saying that after restart this screen comes out and files are erased.
    Now, what do you think? How can I fix this?
    Can anybody send me the system files? while two backup files (SRAM1_0A.FDB) and (SRAM1_0B.FDB) are still in the memory!!!

    Thanks
    i never heard that you can erase F-Rom by pressing P+Q+CANCEL

  19. #19
    Join Date
    Oct 2009
    Posts
    297

    Re: Need file Fanuc 18Mc Nc-basic

    Quote Originally Posted by zavateandu View Post
    i never heard that you can erase F-Rom by pressing P+Q+CANCEL
    That is correct. That Is why I am thinking there is a hardware problem.

    Regards

    AlexFanuc

  20. #20
    Join Date
    Mar 2010
    Posts
    72

    Re: Need file Fanuc 18Mc Nc-basic

    Quote Originally Posted by alexfanuc View Post
    Hello:

    Would you please take a photograph of the "yellow box" behind the display?

    Regards

    AlexFanuc
    Hi dear AlexFanuc
    Which yellow box you are talking about? Please clearify

Page 1 of 2 12

Similar Threads

  1. Fanuc 18MC 436 Z Axis: SoftThermal (OVC)
    By BJSwart in forum Fanuc
    Replies: 0
    Last Post: 10-31-2011, 03:14 PM
  2. Fanuc 18MC Question
    By swartling in forum Fanuc
    Replies: 4
    Last Post: 05-03-2011, 07:04 PM
  3. Alarm 410 and 414 fanuc 18mc
    By jlviloria in forum Hyundai Kia
    Replies: 1
    Last Post: 03-26-2009, 07:04 PM
  4. RISK 64 on Fanuc-18MC Controller
    By iNUC in forum Fanuc
    Replies: 0
    Last Post: 09-21-2008, 09:38 AM
  5. Large PartPrograms on Fanuc 18MC,how to
    By ddanutz in forum Fanuc
    Replies: 6
    Last Post: 10-30-2006, 07:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •