[rajesh_1355]

Dear Friends,

I have VMC - Victor V-Centere-80 with 24 tool magzine.
Its all data cleaned up. I do not have data, can any helping person, pl send me the machine data (D-data also). Its a Fanuc- OM control.

Thanks in anticipation.

[email protected]
[email protected]
[email protected]

[fanuservicetech]

Please contact Victor. I think you will need machine serial number and control model when you contact them so that they can get you a generic list.
http://www.victormachines.com/products_line.html

[VWSatOz]

Here are the Fanuc OM numbers you asked for... hope these help
DNG (keep relay)
500 1011
501 100000
504 100100
506 10010
507 10000
510 110
511 10010
513 10001
514 &515 &516 all 100
517 10000
520 111
522 1000 the rest are all tool magazine numbers, it is only the number 10 that is a bit weird being 10000 so I assume twenty would be 100000
524 1, 526 10, 528 11, 530 100, 532 101, 534 110, 536 111, 538 1000, 540 1001, 542 10000, 544 10001, (=tool #11 in my Victor mill with 16 tools ) this list will need to keep going right up to 24 tools in your magazine

[udrııl79]

THANKS..

BEST REGARDS.