I was wondering if there is anything I could add to the water in my water table to help keep the water from turning like crap so fast!
I was wondering if there is anything I could add to the water in my water table to help keep the water from turning like crap so fast!
Plasma Quench is what I use. I have not had any problems so far. http://www.koalindustries.com/plasmaquench.html
Thanks totalfab06 , I new someone here would be able to help..
I put Soda Crystals in my Water Table.
It stops the water from 'going off'
I cleaned the water out of my Water Table for the first time in 2 months.
It was really nasty, very dark in colour and I removed about 5 lb of sediment from the bottom of the tank
At least the water table stopped all that nasty plasma dust from getting into the air
My Water Table only holds approx. 16 gallons, and I need to make a new tank with greater capacity, and it will also have a separate air/water tank
I did notice that after cleaning my tank, and replacing the water the smoke was noticeably less when cutting.
Andy