Originally Posted by
Grebbo
Hi everyone,
I thought I would share my new Gecko 203v heat sink setup, this is an interlocking two part heat sink that is particularly designed to accept 2 x 80mm fans on either end, making it very efficient, its going in to my new controller box that I’m currently setting up. Once installed I will put some heat transfer compound between the drivers and the heat sink itself.
Hi,
Snap! I've got a similar setup with the same heatsink modules, although I've mounted 2 G203V on each side with a breakout board on top. There is room for 2 more Geckos, as the Heatsink runs front to back in the enclosure such that air doesn't get sucked into the enclosure, but passes straight through the heatsink.
Cheers,
Peter.
-------------------------------------------------
Homann Designs - http://www.homanndesigns.com/store