[rajesh_1355]

Dear Sir,
I have a VMC- Vcerter -80

WITH
Fanuc Series O-M
Sr, No, NT-1320
Nc System - OMC
VICTOR TAICHUNG MACHINERY
DATA ON FANUC MOTHER BOARD:
FANUV SERIES O-MC
TYPE: A02B-0098-8511
DATE 1991-05
NO. 1053184
all the m/c data cleaned up.

We don't have complete data. With uncomplete data m/c all axis are running but tool changing not working. We require D-data which is to be store in Diagonasis mode.
Pl send data if any body have the same model.
Thanks.
[email protected]
[email protected]

[vikrant2]

Dear Rajesh,
You have the option of contacting Victor Taichung directly or get in touch with Victor Agent in your respective area.
if any help needed email me.

[TERRY PRICE]

Are you seeking data on Fanuc series O-M controllers? If so I have a complete set of manuals for it. I will be happy to supply you with ant information that I can.

Terry Price

[email protected]

[VWSatOz]

I have same/similar Victor mc 700 X-travel, maybe older, but Fanuc OMA control, so I don't think the settings would be the same. It is the timing values for the toolchanger cam/arm motion DC braking dwell times that you are probably missing, and maybe the magazine too etc
You would be best to contact Taichung Machinery in Taiwan by FAX or email

[f-bu]

These should fit, were archived as v80
%
N10300 P 00111100
N10301 P 00000000
N10302 P 00000000
N10303 P 00000000
N10304 P 00000000
N10305 P 00111100
N10306 P 00000000
N10307 P 11011000
N10308 P 00101010
N10309 P 00000000
N10310 P 00010100
N10311 P 00000000
N10312 P 11101101
N10313 P 00101010
N10314 P 00000000
N10315 P 10000000
N10316 P 00000000
N10317 P 10011100
N10318 P 11100010
N10319 P 00000000
N10320 P 00111100
N10321 P 00000000
N10322 P 00000000
N10323 P 00000000
N10324 P 00000000
N10325 P 00000111
N10326 P 00000000
N10327 P 00011000
N10328 P 00000000
N10329 P 00000011
N10330 P 00010100
N10331 P 00000000
N10332 P 00100101
N10333 P 00000000
N10334 P 00000011
N10335 P 01100100
N10336 P 00000000
N10337 P 00101110
N10338 P 00011101
N10339 P 00000000
N10340 P 00010100
N10341 P 00000000
N10342 P 00100101
N10343 P 00000000
N10344 P 00000011
N10345 P 00101010
N10346 P 00000000
N10347 P 00000011
N10348 P 00011101
N10349 P 00000000
N10350 P 00000000
N10351 P 00000100
N10352 P 10001001
N10353 P 00100000
N10354 P 00000000
N10355 P 01011000
N10356 P 00000010
N10357 P 00000101
N10358 P 00000011
N10359 P 00000011
N10360 P 11100000
N10361 P 00101110
N10362 P 11100110
N10363 P 00110001
N10364 P 00000001
N10365 P 00000101
N10366 P 00000000
N10367 P 11011101
N10368 P 00011100
N10369 P 00000000
N10370 P 00001010
N10371 P 00000000
N10372 P 11010001
N10373 P 00111001
N10374 P 00000000
N10375 P 10000000
N10376 P 00000000
N10377 P 10001111
N10378 P 00000010
N10379 P 00000000
N10380 P 00000000
N10381 P 00000000
N10382 P 00000000
N10383 P 00000000
N10384 P 00000000
N10385 P 00000110
N10386 P 00000000
N10387 P 00010111
N10388 P 00000000
N10389 P 00000011
N10390 P 00110000
N10391 P 00000000
N10392 P 01000001
N10393 P 00000000
N10394 P 00000000
N10395 P 01111000
N10396 P 00000000
N10397 P 10111010
N10398 P 00000000
N10399 P 00000011
N10400 P 00000000
N10401 P 00000000
N10402 P 00010001
N10403 P 00000000
N10404 P 00000011
N10405 P 00000000
N10406 P 00000000
N10407 P 00000000
N10408 P 00000000
N10409 P 00000000
N10410 P 00000000
N10411 P 00000000
N10412 P 00010111
N10413 P 00000000
N10414 P 00000011
N10415 P 00000000
N10416 P 00000000
N10417 P 00000000
N10418 P 00000000
N10419 P 00000000
N10420 P 00000000
N10421 P 00000000
N10422 P 00000000
N10423 P 00000000
N10424 P 00000000
N10425 P 00000111
N10426 P 00000000
N10427 P 00011000
N10428 P 00000000
N10429 P 00000011
N10430 P 00010000
N10431 P 00001110
N10432 P 11111101
N10433 P 10000100
N10434 P 00000000
N10435 P 00000000
N10436 P 00000000
N10437 P 00000000
N10438 P 00000000
N10439 P 00000000
N10440 P 00000000
N10441 P 00000000
N10442 P 00000000
N10443 P 00000000
N10444 P 00000000
N10445 P 00000000
N10446 P 00000000
N10447 P 00000000
N10448 P 00000000
N10449 P 00000000
N10450 P 00000000
N10451 P 00000000
N10452 P 00000000
N10453 P 00000000
N10454 P 00000000
N10455 P 00000000
N10456 P 00000000
N10457 P 00000000
N10458 P 00000000
N10459 P 00000000
N10460 P 00000000
N10461 P 00000000
N10462 P 00000000
N10463 P 00000000
N10464 P 00000000
N10465 P 00000000
N10466 P 00000000
N10467 P 00000000
N10468 P 00000000
N10469 P 00000000
N10470 P 00000000
N10471 P 00000000
N10472 P 00000000
N10473 P 00000000
N10474 P 00000000
N10475 P 00000000
N10476 P 00000000
N10477 P 00000000
N10478 P 00000000
N10479 P 00000000
N10480 P 00000100
N10481 P 00000000
N10482 P 00000000
N10483 P 00000000
N10484 P 00000000
N10485 P 00000000
N10486 P 00000000
N10487 P 00000000
N10488 P 00000000
N10489 P 00000010
N10490 P 00000000
N10491 P 00000000
N10492 P 00000001
N10493 P 00000000
N10494 P 00000000
N10495 P 00000001
N10496 P 00000000
N10497 P 00000000
N10498 P 00000000
N10499 P 00000000
N10500 P 00000000
N10501 P 00000000
N10502 P 00000000
N10503 P 00000000
N10504 P 00000000
N10505 P 00000000
N10506 P 00000000
N10507 P 00000000
N10508 P 00000000
N10509 P 00000000
N10510 P 00000000
N10511 P 00000000
N10512 P 00000000
N10513 P 00000000
N10514 P 00000000
N10515 P 00000000
N10516 P 00000000
N10517 P 00000000
N10518 P 00000000
N10519 P 00000000
N10520 P 00000001
N10521 P 00000000
N10522 P 00000011
N10523 P 00000010
N10524 P 00000101
N10525 P 00000110
N10526 P 00000111
N10527 P 00001000
N10528 P 00001001
N10529 P 00010000
N10530 P 00010001
N10531 P 00010010
N10532 P 00010011
N10533 P 00010100
N10534 P 00010101
N10535 P 00010110
N10536 P 00010111
N10537 P 00011000
N10538 P 00011001
N10539 P 00100000
N10540 P 00100001
N10541 P 00100010
N10542 P 00100011
N10543 P 00100100
N10544 P 00000000
N10545 P 00000000
N10546 P 00000000
N10547 P 00000000
N10548 P 00000000
N10549 P 00000000
N10550 P 00000000
N10551 P 00000000
N10552 P 00000000
N10553 P 00000000
N10554 P 00000000
N10555 P 00000000
N10556 P 00000000
N10557 P 00000000
N10558 P 00000000
N10559 P 00000000
N10560 P 00000001
N10561 P 00000100
N10562 P 00000011
N10563 P 00000000
N10564 P 00000101
N10565 P 00000110
N10566 P 00000111
N10567 P 00001000
N10568 P 00001001
N10569 P 00010000
N10570 P 00010001
N10571 P 00010010
N10572 P 00010011
N10573 P 00010100
N10574 P 00010101
N10575 P 00010110
N10576 P 00010111
N10577 P 00011000
N10578 P 00011001
N10579 P 00100000
N10580 P 00100001
N10581 P 00100010
N10582 P 00100011
N10583 P 00100100
N10584 P 00000000
N10585 P 00000000
N10586 P 00000000
N10587 P 00000000
N10588 P 00000000
N10589 P 00000000
N10590 P 00000000
N10591 P 00000000
N10592 P 00000000
N10593 P 00000000
N10594 P 00000000
N10595 P 00000000
N10596 P 00000000
N10597 P 00000000
N10598 P 00000000
N10599 P 00000000
N10600 P 00000000
N10601 P 00000000
N10602 P 00000000
N10603 P 00000000
N10604 P 00000000
N10605 P 00000000
N10606 P 00000000
N10607 P 00000000
N10608 P 00000000
N10609 P 00000000
N10610 P 00000000
N10611 P 00000000
N10612 P 00000000
N10613 P 00000000
N10614 P 00000000
N10615 P 00000000
N10616 P 00000000
N10617 P 00000000
N10618 P 00000000
N10619 P 00000000
N10620 P 00000000
N10621 P 00000000
N10622 P 00000000
N10623 P 00000000
N10624 P 00000000
N10625 P 00000000
N10626 P 00000000
N10627 P 00000000
N10628 P 00000000
N10629 P 00000000
N10630 P 00000000
N10631 P 00000000
N10632 P 00000000
N10633 P 00000000
N10634 P 00000000
N10635 P 00000000
N10636 P 00000000
N10637 P 00000000
N10638 P 00000000
N10639 P 00000000
N10640 P 00000000
N10641 P 00000000
N10642 P 00000000
N10643 P 00000000
N10644 P 00000000
N10645 P 00000000
N10646 P 00000000
N10647 P 00000000
N10648 P 00000000
N10649 P 00000000
N10650 P 00000000
N10651 P 00000000
N10652 P 00000000
N10653 P 00000000
N10654 P 00000000
N10655 P 00000000
N10656 P 00000000
N10657 P 00000000
N10658 P 00000000
N10659 P 00000000
N10660 P 00000000
N10661 P 00000000
N10662 P 00000000
N10663 P 00000000
N10664 P 00000000
N10665 P 00000000
N10666 P 00000000
N10667 P 00000000
N10668 P 00000000
N10669 P 00000000
N10670 P 00000000
N10671 P 00000000
N10672 P 00000000
N10673 P 00000000
N10674 P 00000000
N10675 P 00000000
N10676 P 00000000
N10677 P 00000000
N10678 P 00000000
N10679 P 00000000
N10680 P 00000000
N10681 P 10000000
N10682 P 00000001
N10683 P 00000000
N10684 P 00000000
N10685 P 11000100
N10686 P 11100100
N10687 P 01000000
N10688 P 00000000
N10689 P 00010010
N10690 P 00100000
N10691 P 00000010
N10692 P 00000000
N10693 P 00010000
N10694 P 00000000
%

[rajesh_1355]

dear sir,

send me the D xxxx data also which are stored in Diagonasis mode.

Thanks

[f-bu]

Dear Rajesh,
look at the numbers at libe begin, N10300 is yours DGN300.
As per the copy I have for v80 PLC, there are 30 timers, 6 counters etc.
;TIMER LENGTH: 150
;COUNTER LENGTH: 30
;BCD 4 LENGTH: 0
;BCD 2 LENGTH: 200
;D-AREA LENGTH: 395

[VWSatOz]

Rajesh these are the DGN (TIMER) settings from my Fanuc OMA Victor mill, one not shown are all zeros
300 10100
305 111000
310 101000
315 10100
320 1100100
325 1010
330 1010
335 1010
340 10100
345 1010
350 10
355 1010
360 10100
365 1100
370 110
380 1100100
385 1100100
390 11001
395 1100100
400 11110
405 10001100
410 10001100
415 1100100
420 101000
425 101000
435 11100000
440 1010
445 1010
480 10110
482 110
I hope this gets you going, please let me know if these work OK

[rajesh_1355]

Thanks for your sincer help.
But with above data still tool changing not working.
alarm 1013 Commanded tool not attain appear
Any more help pl.

[VWSatOz]

At least we have an idea of the problem. It seems your magazine can't find the tool you want to load into the spindle. When you 1st turn on the machine try calling up maybe tool #5. The magazine should rotate all way around to find its reference start point and then go back to find pot #5 (which will initially have tool#5 loaded in it by you, tool #5 could up in any OTHER pot after a random tool change).

If you have put in the values kindly given to you by "f-bu" & his is the OMC system same as yours, then you will notice from his list that N10521 which is the nunber for pot#2 shows 00000000 which means his tool#2 was in the spindle not in the magazine at the time of the readings being copied. This N10521 should be 00000010 which means #2 when you initially reset all of them as you are trying to do.
Just try calling up T#1 input, ouput etc through various/all tool numbers (which should make the magazine rotate to that pot number) without the M6 for actual toolchange. The T# should actually FIND any one of all the 24 tools, (other than the one that the machine might think is currently in the pot).

At least get this magazine problem sorted out 1st, and the M6 can be fixed after.

The mc always knows which tool is in the spindle &there may be other parameters to be reset to zero if you need to get the "tool in the spindle" back to T#0
I am only trying to help... remember my control is OMA not OMC but waht I suggest above should still apply. Let us all know if problem still exists, as someone else might have a better suggestion.

[f-bu]

Dear Rajesh,
I also can not remember wich number of tols had this machine, and some keep relays may differ. Enclosed is a ladder printout from the machine with the PMC parameters I have sent. Sorry, symbol data are not included in old EPROM files, so...

[sharathss]

Dear rajesh

can u please tell me where you are located so that i can assist you with my service person, normally all taiwanese machines will come with data backup cd u must look for it or it could be the problem of PLC or relay. i sell competitor machines of victor in india and also i have most of the data of all the machine if you can tell specific detail i can try

[Jung]

I may have 1220, may be same as yours.
I'll check it tomorrow

Dear Sir,
I have a VMC- Vcerter -80

WITH
Fanuc Series O-M
Sr, No, NT-1320
Nc System - OMC
VICTOR TAICHUNG MACHINERY
DATA ON FANUC MOTHER BOARD:
FANUV SERIES O-MC
TYPE: A02B-0098-8511
DATE 1991-05
NO. 1053184
all the m/c data cleaned up.

We don't have complete data. With uncomplete data m/c all axis are running but tool changing not working. We require D-data which is to be store in Diagonasis mode.
Pl send data if any body have the same model.
Thanks.
[email protected]
[email protected]

[rai]

I would much appreciate for sending me these manuals. Please send me these manuals.

Are you seeking data on Fanuc series O-M controllers? If so I have a complete set of manuals for it. I will be happy to supply you with ant information that I can.

Terry Price

[email protected]