Swore I would never buy a used machine.....but....I have been looking at the LU- 400 and found this clean older LB
Anyhooo is has the OSP7000L control. Is this a decent control..still serviceable..something you can get a decent cam post for?

Another thing I noticed is the max feed and rapid is 400 ipm. The new ones are X-787 / Z-984. I farm out all the lathe work now so it will be a whole new world for me, but is that slower feed / rapid going to seem like a snail or just older slower?
If you are looking at a mill and the rapid is twice as fast, that would be a lot of difference. But in a lathe...