584,800 active members*
4,717 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2007
    Posts
    12

    Tornos Enc-264 programing help

    Hello,
    I am having a hard time getting my tornos to run. In the sample programs in the manual there are two sub routine's that i am unsure what they do they are or of I have to have them in my program.
    G160 H9810
    G160 H9910
    They seem to be in every sample progarm for channel 1. I am new to cnc let alone swiss. I also have some alarms that pop up. They are
    -2035 p/s clamping oil ( I filled it and the alarm went away for a little bit but came back, do I just need to fill it again?)
    -008 p/s this one is not in my manual so I don't what this is.
    -945 This says it is a servo alarm, But when I check the read outs on them the are dashes as the sould be.
    Please help me as I bought this machine to run a job and ended up doing it manually.
    Thanks in advance, Colin

  2. #2
    Join Date
    Jun 2015
    Posts
    4

    Re: Tornos Enc-264 programing help

    Hello! I've got some issues with my ENC-264. The most problematic one, at the begining of the program, when the cutoff tool makes a clear cut, the main head supposed to go back, with open collet (In Z direction). But instead it goes right towards the tools (with open collet), and an error code arise (It's in end position -Z), so i can not produce anything. Does anyone have idea, how to get it back to work?
    Header Looks as:
    G161 A16.0 B0.03 C0202 F-92.0 h3.0 I0 K1 J1 M40 Q0 R50 S600 T1800
    Thanks.

  3. #3
    Join Date
    Jul 2018
    Posts
    2
    Quote Originally Posted by EvansMachine View Post
    Hello,
    I am having a hard time getting my tornos to run. In the sample programs in the manual there are two sub routine's that i am unsure what they do they are or of I have to have them in my program.
    G160 H9810
    G160 H9910
    They seem to be in every sample progarm for channel 1. I am new to cnc let alone swiss. I also have some alarms that pop up. They are
    -2035 p/s clamping oil ( I filled it and the alarm went away for a little bit but came back, do I just need to fill it again?)
    -008 p/s this one is not in my manual so I don't what this is.
    -945 This says it is a servo alarm, But when I check the read outs on them the are dashes as the sould be.
    Please help me as I bought this machine to run a job and ended up doing it manually.
    Thanks in advance, Colin


    Do you still have enc 264? I have solution for your one problem. 008 and 2035 alarm

Similar Threads

  1. Tornos ENC HELP!!
    By EvansMachine in forum CNC Swiss Screw Machines
    Replies: 2
    Last Post: 09-08-2015, 01:38 PM
  2. Online cnc programing/ offline cnc programing
    By grimantas in forum Polls
    Replies: 0
    Last Post: 11-28-2012, 02:03 PM
  3. Tornos TB DecoEvo 10
    By mikeswiss in forum CNC Swiss Screw Machines
    Replies: 0
    Last Post: 10-23-2012, 05:30 PM
  4. Tornos ENC 162
    By Beep2Beep in forum CNC Swiss Screw Machines
    Replies: 4
    Last Post: 11-17-2011, 03:44 AM
  5. Programing Tornos ENC 167 , 163
    By dali_290 in forum CNC Swiss Screw Machines
    Replies: 0
    Last Post: 11-12-2010, 11:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •