584,863 active members*
4,984 visitors online*
Register for free
Login
Results 1 to 9 of 9
  1. #1
    Join Date
    Aug 2015
    Posts
    28

    Anilam 1400m software recovery

    I have a HH Roberts mill with an Anilam 1400m control. The hard drive fried and the backup I have had for a few years is corrupt. I've got a couple of call's into Acu-rite leaving messages but have not had a response as of yet. I was wondering if anyone here has bought set up disk for an outdated control such as this before? The software on the hard drive is recovered all I need is the dos version they put on these machines. Everything in the root directory is non recoverable...
    The end result is directly connected to the effort applied

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: Anilam 1400m software recovery

    I have a copy of DOS 6.22 if that would help
    Jim Dawson
    Sandy, Oregon, USA

  3. #3
    Join Date
    Aug 2015
    Posts
    28

    Re: Anilam 1400m software recovery

    Quote Originally Posted by Jim Dawson View Post
    I have a copy of DOS 6.22 if that would help
    Jim, thanks for the offer. I just got an email from Anilam with links to download Rom Doss and the control software... They were very helpful..
    The end result is directly connected to the effort applied

  4. #4
    Join Date
    Sep 2004
    Posts
    140

    Re: Anilam 1400m software recovery

    JohnHennessy,
    Do you still have the email or links address from Anilam? I am trying to install a new hard drive in our Anilam 1400 mill control. Please reply, message or email to [email protected] Thank you!

  5. #5
    Join Date
    Aug 2015
    Posts
    28

    Re: Anilam 1400m software recovery

    Quote Originally Posted by sbalder View Post
    JohnHennessy,
    Do you still have the email or links address from Anilam? I am trying to install a new hard drive in our Anilam 1400 mill control. Please reply, message or email to [email protected] Thank you!
    I just sent it.
    The end result is directly connected to the effort applied

  6. #6
    Join Date
    Sep 2004
    Posts
    140

    Re: Anilam 1400m software recovery

    Thank you very much!!!!!!!!

  7. #7
    Would anyone by chance have a link to the software still? I am helping a buddy work on a machine in a machine trades class with a bad drive and corrupt floppy disks. Thank you

  8. #8
    That link would be helpfull is someone would post it, if it still works.

  9. #9
    Join Date
    Nov 2007
    Posts
    9
    Quote Originally Posted by Oldtinrods View Post
    Would anyone by chance have a link to the software still? I am helping a buddy work on a machine in a machine trades class with a bad drive and corrupt floppy disks. Thank you
    I have the same thing today. Does anyone have any advice on this, other than searching through post after lost to try and find info. Have a Fryer machine, decided to reboot using Anilam original disk and now it says corrupt. Any help? Thanks!

Similar Threads

  1. Anilam 1400m
    By quadbob in forum Controller & Computer Solutions
    Replies: 5
    Last Post: 01-08-2013, 11:32 PM
  2. Anilam 1400m control
    By malex_alv in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 09-05-2012, 01:07 PM
  3. Anilam 1400M contoller
    By wes111 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 02-16-2012, 03:57 PM
  4. Anyone know Anilam 1400m very well?
    By Mikey69 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 06-03-2009, 03:53 PM
  5. Networking an Anilam 1400M
    By iiweeldman in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 05-18-2009, 03:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •