584,833 active members*
5,582 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > OKK > emg ls problem MCV 460
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2008
    Posts
    15

    emg ls problem MCV 460

    I Have a okk mcv 460,like the 500. i had the machine running the other day,was fine. Shut it down for some maintence, when started back up got the ready light, then after a few seconds got alarm 1008 oil cooling (head) & 1071 emg LS on. it is stuck in a state emg stop. Cooler seems ok, emg stop button is working. the local guy isn't real familair with the 5000c2 controls. Any help is appreciated.

  2. #2
    Join Date
    Apr 2008
    Posts
    11
    You should have a EMG> release switch. Hold this up, & hit reset. Then in handle, move all axis off home pos. at least a 1\2 inch. If that wount work, check for a stuck limit switch. The screen may tell you what axis it is.

  3. #3
    Join Date
    May 2008
    Posts
    15
    Thanks for the info, i had tried that. i got a hold of mitsubishi and found out it was a board in the control.

  4. #4
    Join Date
    Mar 2004
    Posts
    47

    okk manuals

    I have a mch 450 and a pcv40. I have manuals for both. I am looking for a "parts" machine. What board do you need?
    Bob
    Robert Setree 502-452-9851

  5. #5
    Quote Originally Posted by Luslugger View Post
    I have a mch 450 and a pcv40. I have manuals for both. I am looking for a "parts" machine. What board do you need?
    Bob
    Hi,
    I need the parameter for pcv 40 with fanuc 18MB,
    Do you have it?
    Regards,
    Sting

Similar Threads

  1. Please Help. Having problem with CNC driver/card problem.
    By todatop in forum Commercial CNC Wood Routers
    Replies: 7
    Last Post: 02-09-2018, 05:40 PM
  2. Having problem with CNC driver/card problem
    By todatop in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 04-09-2014, 05:45 PM
  3. Tube problem or powersupply problem? Help you to check out
    By Melody-gweike in forum Laser Engraving / Cutting Machine General Topics
    Replies: 0
    Last Post: 10-05-2012, 04:09 AM
  4. daewoo puma 12lb tape format problem/parameter problem
    By robb12877 in forum Daewoo/Doosan
    Replies: 0
    Last Post: 08-25-2011, 06:13 AM
  5. Replies: 5
    Last Post: 08-04-2010, 11:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •