[DARKWINZ]

Hello, Everyone, Im new to the world of okuma and i need some help, The shop i started working for only has to machines one 5020-m and a 5020-L and no tooling at all, I have worked on fadels & mazak for about 10. yrs so i need to find some Example "PROGRAMS" and i need a complete "G-COAD LIST" for the mill everything i've found online was'ent complete..like i have allways used a g56 as a work offset and in a book (the book only has a little info) i was reading,said it was a tool length offset?

[mark.nguyen2000]

Hello,

I need help about finding out machining time for quote for some part. Can you help me to find the machine time for some part.

Thanks
Samir

[dcoupar]

These are from the 7000M, but they should get you close.

[DARKWINZ]

ty,that was a big help,

[DARKWINZ]

Now, dose anyone know were i can find a "POST" for "MASTERCAM 10" thats made for a "Generic OKUMA MILL and LATHE "?????

[72k5]

Now, dose anyone know were i can find a "POST" for "MASTERCAM 10" thats made for a "Generic OKUMA MILL and LATHE "?????

i also have okuma's with a 5020m controls. I used a generic okuma post for mastercamX that can be downloaded from mastercam. Actually i got mine emailed to me from my local mastercam distributor. Try that.....if you dont sucseed let me know and I'll email it to you.

Its pretty close but i still do some editing after posting.

[DARKWINZ]

kool ty ill try that and ill let ya know thanks again