585,951 active members*
3,706 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Parameter write enabling on Fanuc OiT

Thread: Parameter write enabling on Fanuc OiT

Results 1 to 7 of 7
  1. 05-30-2008, 10:33 AM #1
    hense
    hense is offline Registered
    Join Date
    Sep 2007
    Posts
    16

    Parameter write enabling on Fanuc OiT

    My CNC does not accept parameter write. If I write 1 for PWE, it set this value back to 0.
    Reply With Quote Reply With Quote
  2. 05-30-2008, 12:42 PM #2
    cogsman1
    cogsman1 is offline Registered
    Join Date
    Jan 2005
    Posts
    304
    You may need to be in "MDI" when doing that.
    Reply With Quote Reply With Quote
  3. 05-30-2008, 12:55 PM #3
    hense
    hense is offline Registered
    Join Date
    Sep 2007
    Posts
    16
    I tried this in MDI.Even set the data protect parameter to 0
    Reply With Quote Reply With Quote
  4. 05-30-2008, 02:15 PM #4
    nabil_elbadri
    nabil_elbadri is offline Member
    Join Date
    Nov 2007
    Posts
    79
    if the keyboard of the machine is old check the soft keys on the keyboard maybe some soft key was stuck
    Reply With Quote Reply With Quote
  5. 05-30-2008, 02:52 PM #5
    dcoupar
    dcoupar is offline Gold Member
    Send a message via AIM to dcoupar Send a message via MSN to dcoupar
    Join Date
    Mar 2003
    Posts
    2932
    Are there ON:1 and OFF:0 soft keys?
    Reply With Quote Reply With Quote
  6. 05-30-2008, 03:49 PM #6
    nabil_elbadri
    nabil_elbadri is offline Member
    Join Date
    Nov 2007
    Posts
    79
    make sure that the keyboard is ok maybe some oil or dust came inside the keyboard or u have some key on the keyboard stuck.
    Reply With Quote Reply With Quote
  7. 06-02-2008, 11:26 AM #7
    Ozemale6t9
    Ozemale6t9 is offline Registered
    Join Date
    Mar 2006
    Posts
    167
    memory protect key?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fanuc parameter 901
    By mistux in forum Fanuc
    Replies: 14
    Last Post: 12-04-2009, 06:28 PM
  2. Fanuc 6t parameter #0-5 and #300-304
    By ixoxi999 in forum Fanuc
    Replies: 1
    Last Post: 12-25-2007, 02:44 AM
  3. Fanuc 0T parameter
    By Master_CNC in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 11-26-2007, 08:15 PM
  4. L50 parameter write
    By Bluesman in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 02-09-2006, 12:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules