[novacustard]

I have a cnc router built around mostly parker servos, drives and a Parker 6K controller.
I have been using Mastercam to output G code, and devised a complicate Excel spreadsheet that would translate, with a bit of manual cutting and pasting, into the 6K language used by the 6K.
I have since developed a simple Python program that takes the Gcode from Mastercam and spits out the 6K code, including compiled paths.
If anyone is interested, please PM me.

Cheers,

Richard

[dgcooper]

I have a cnc router built around mostly parker servos, drives and a Parker 6K controller.
I have been using Mastercam to output G code, and devised a complicate Excel spreadsheet that would translate, with a bit of manual cutting and pasting, into the 6K language used by the 6K.
I have since developed a simple Python program that takes the Gcode from Mastercam and spits out the 6K code, including compiled paths.
If anyone is interested, please PM me.

Cheers,

Richard

Hi, I have parker 6k and trying to use BoBCAD-CAM. Any help would be apreciated.

[novacustard]

Hi, I have parker 6k and trying to use BoBCAD-CAM. Any help would be apreciated.

Hi there. Not been online for a while so soory for the delay.

Can you email me a couple of G-Code files - 1 quite simple, 1 more complex. I will see how the converter works and can email you back the Parker code for you to try.

Richard.