500,695 active members
4,732 visitors online
Register for free
Login
Page 2 of 2 12
Results 13 to 14 of 14
  1. #13
    Registered jimcolt's Avatar
    Join Date
    Jan 2008
    Posts
    2241
    All of the interface information is in the Powermax1000 operators manual. Manuals are shipped with every Hypertherm plasma system....if you do not have the manual go to Choose your region and language | Hypertherm , click on download library (at the top of the page) choose system type (Powermax1000) then choose manuals, then operators manual.

    Pins 3 and 4 are plasma start.....these will only function with the machine torch....with a hand torch they are inactive as the hand torch has its own trigger switch. With the plasma on and air pressure adequate....connecting p[in 3 to 4 will start the plasma. These are not polarity dependant.

    Pins 12 and 14 are a relay contact output ....this contact closes when the arc is transferred and cutting the plate. This is used to start machine motion or the height control.

    Pins 5 and 6 are 50:1 divided arc voltage for use with some height controls. Raw DC arc voltage can be accessed on the main circuit board inside the Powermax1000, information for these connections is also in the manual.

    Jim Colt Hypertherm


    Quote Originally Posted by spotlite View Post
    On POWERMAX1000 with Machine CNC output plug, please specify the plug pinouts finctions?

    How to get the document sabout that?

  2. #14
    Registered
    Join Date
    Dec 2008
    Posts
    19
    Do you have a manual for the controller?

Page 2 of 2 12

Similar Threads

  1. Anyone with Dynacnc Dyna4000 controller
    By lowpull in forum General Waterjet
    Replies: 5
    Last Post: 05-16-2008, 05:53 PM
  2. 3/16" AL with Hypertherm Powermax 1000
    By zeoncomp in forum General Waterjet
    Replies: 7
    Last Post: 01-16-2008, 07:18 PM
  3. Anybody toubleshoot there Powermax 1000?
    By tyler774 in forum General Waterjet
    Replies: 4
    Last Post: 02-25-2007, 09:25 PM
  4. Hypertherm Powermax G3 not so CNC ready?
    By Knut in forum General Waterjet
    Replies: 2
    Last Post: 09-26-2006, 04:00 PM
  5. THC 300 and hypertherm 1000
    By Don C in forum General Waterjet
    Replies: 0
    Last Post: 10-31-2005, 12:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •