I have Mach 3 ver 2.0, I has my machine runnig fine until the copter graphics card died. So here I am with a new CPU both old and new are dell's and now the machine homes fine but any go1 movements are jumpy. I downloaded a new verson of mach 3 and it seems to be running fine? But, sence i dont have a license for the newer version i cant load the entire file. I dont get it version 2.0 worked just fine on my old pcu???
Thread: Rough Movement
Results 1 to 2 of 2
-
06-05-2008, 01:46 AM #1
Registered
- Join Date
- Jan 2007
- Posts
- 122
Rough Movement
-
06-05-2008, 02:06 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Your old license will work with the new version. Just copy the license file to the new versions folder.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With QuoteSimilar Threads
-
z-rough question
By dcrblazer in forum SurfcamReplies: 3Last Post: 01-11-2008, 08:55 AM -
Rough Movement
By jhwatts in forum XylotexReplies: 2Last Post: 09-28-2006, 09:07 PM -
Need help with rough cutting(backlash??)
By bd007 in forum Commercial CNC Wood RoutersReplies: 6Last Post: 03-08-2006, 10:49 PM -
truemill and z-rough and srm
By championp in forum SurfcamReplies: 1Last Post: 02-23-2006, 04:51 AM
Posting Permissions
