Fanuc 16iTB Swiss-type STAR MICRONICS SV-32 lathe lost all parameter. I would like to buy this parameter set. If you have the same model lathe, please PM me.
Thanks
Fanuc 16iTB Swiss-type STAR MICRONICS SV-32 lathe lost all parameter. I would like to buy this parameter set. If you have the same model lathe, please PM me.
Thanks
Hi everybody,
I tried to run this machine.
It have two FSSBs that connect to servo amplifiers. The first one connect to 2 amplifiers which drive 5 servo motors. The second connect to another 2 amplifiers which drive 3 axis servo motors and two servo motors act like spindle. All motors have absolute pulse coders.
I set dogless zero return with absolute encoder. After ref. return only first 5 motors (on first FSSB) remember zero point, 3 others do not (on 2nd FSSB).
Do I miss something?
Hi,
can you tell me the machine serial number? Maybe i can help you with a parameter set for SV-32 with FS-16iTB control.
I don't know why you need serial number? But I'll get back to workshop to get it. If you can help me without serial number, email to [email protected]
Thanks for your help.
The reason he needs the serial numer is that there differant settings for differant serial numbers due to options and upgrades of Fanuc equipment.
The problem will be the fanuc options parameters to suit your machine and the hardware.
I am surprised that you do not have your original electrical manual as the parameters are usually attached the them.