502,743 active members
4,851 visitors online
Register for free
Login
IndustryArena Forum > Mechanical Engineering > Linear and Rotary Motion > Best belt drive ever! (If I do say so myself)
Page 1 of 30 12311
Results 1 to 12 of 358
  1. #1

    Best belt drive ever! (If I do say so myself)

    Hi guys,
    I'm not ready for a full release of this, so I'm starting a thread here for discussion. This summer, I'll put a complete product release thread up in the proper place.
    This is called ServoBelt. The vid is (almost) self explanitory.

    http://www.bell-everman.com/ServoBelt.wmv

    It's been tough keeping my mouth shut about it when asked what's the best way to drive a large format DIY NC machine!

    Now I can talk about it, as it is patent pending as of Tuesday.

    I plan to have parts available online in the fall for people here, though our usual business is OEM customers. It would be a new realm indeed for us to sell parts and not whole systems, but since joining this forum, I have a desire to help!

    Enjoy.

  2. #2
    Registered
    Join Date
    Jun 2007
    Posts
    41
    Your link still doesn't work.

  3. #3
    Quote Originally Posted by zenbot View Post
    Your link still doesn't work.
    Yeah. Weird.
    OK, I changed the name. If you paste what's in quotes in your browser, it should go.

    Am I daft, here? I'm using the link icon and typing it in, and it shows right, but does not work. hmmm

  4. #4
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    33864
    I fixed it the first time, but you're renamed version doesn't work. You don't need to use the link icon, just type in the address. Also, you had a backslash instead of a forward slash, but that didn't fix it.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  5. #5
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    33864
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  6. #6
    Thanks, and sorry. I wondered why my experiments to make it work were changing!


    www.bell-everman.com/ServoBelt.wmv

    Seems to be case sensitive(?)

  7. #7
    Company Representative
    Join Date
    Feb 2004
    Posts
    1083
    Mike,

    Looks like a really interesting system. Does it use other Bosch parts like the linear rail and blocks, belts, or rack? Any target pricing for, say, an 8.5 foot section of servobelt?

    Ahren
    www.cncrouterparts.com

  8. #8
    Quote Originally Posted by ahren View Post
    Mike,

    Looks like a really interesting system. Does it use other Bosch parts like the linear rail and blocks, belts, or rack? Any target pricing for, say, an 8.5 foot section of servobelt?
    It will mount to two t-slots on either Bosch or 80-20 45mm series extrusions. We have a version that wraps around so mounting is to two adjacent slots at 90 deg. Bearing rails are currently 20mm Rexroth-Star, standard is the E-line from them, which is an aluminum rail with steel inserts, and aluminum bearing blocks with inserts as well.

    The belt carrier is our own extrusion, and has features to hold limit sensors (the Bimba pneumatic cylinder sensors).

    We're not quite in production yet and still building our test portfolio. Pricing is forthcoming.

  9. #9

    Higher res video of ServoBelt on youtube

    [ame="http://www.youtube.com/watch?v=OdJoVh6DRPA"]YouTube - ServoBelt: amazing belt drive[/ame]

  10. #10
    Gold Member
    Join Date
    May 2007
    Posts
    72
    I like it, I had considered a belt assembly using just a tight tough belt stretched from end to end but most of the belting I looked at didn't like being bent backwards. Being I am not an engineer by trade, What kind of belt sizing would I have to use for a roughly 250 lb gantry attempting to achieve 875 imp. I don't know how fast I can accelerate it being I only have servo motors capable of 900 oz. I am using dual x axis drives. Hoping it will work well. I did a little home work and this is what I came up with for motors. I would like to purchase 2 of these units with 8.5' travel. Is that something that could be at a reasonable request and of couse HOW much will I have to shell out?

  11. #11
    Registered
    Join Date
    May 2006
    Posts
    1463
    Interesting concept Mike. Looks good.

    At first I thought you had only one roller each side to keep the belt engaged with the rack but then I see you have two rollers each side.

    Is the rack something you have manufactured to match the belt pitch or is it another length of belt with teeth up?

    Greg

  12. #12
    Quote Originally Posted by Bobbyr70 View Post
    ....What kind of belt sizing would I have to use for a roughly 250 lb gantry attempting to achieve 875 imp. I don't know how fast I can accelerate it being I only have servo motors capable of 900 oz. I am using dual x axis drives. ...
    I do engineer these things, but still like to think in simple terms. Just pulling it out of the air, check how wide you can get 5mm pitch belting. (from SDP(?))
    So you have 900 in-oz, that's 56.25 in-lb. Let's say you use a 1" pinion, the radius is .5". So 56.25/.5 is the linear force you can deliver, 112.5 lb. Each motor will see 125 lb of force per g. You are capable of almost a g with a one inch pinion! 1g is 32.2 ft/sec/sec, so I'll leave the last math to you, but acceleration will not be your problem. What you will deal with is stiffness of the drive line, and that's where ServoBelt will excel. There's no stretchy belt in the stiffness equation.

    Quote Originally Posted by Bobbyr70 View Post
    ....I would like to purchase 2 of these units with 8.5' travel. Is that something that could be at a reasonable request and of couse HOW much will I have to shell out?
    I don't know yet. We're making them for a few early adopter OEM's. The belt carrier is going to be an extrusion, but is now a rather expensive long machined part. I'll be selling this extrusion, belting and all other parts. I expect for folks around here it will be in kit form, but who knows. You can do this entirely yourself, though. Just know that you need flanges on the pinion if you want to run the belt on something flat. (we capture both sides of the belt stack so no flanges are needed anywhere in the drive unit.)

Page 1 of 30 12311

Similar Threads

  1. Belt drive or direct drive?
    By VegasRhino in forum General Full 3D Metal Milling Machines
    Replies: 4
    Last Post: 10-10-2013, 12:12 PM
  2. Direct Drive Vs Belt Drive for a Mill/Drill Retrofit?
    By pfeist in forum Uncategorised MetalWorking Machines
    Replies: 11
    Last Post: 02-13-2012, 09:12 AM
  3. X2 belt drive
    By eartaker in forum Benchtop Machines
    Replies: 5
    Last Post: 07-07-2010, 08:26 PM
  4. Belt drive or direct drive?
    By rholliday in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 02-17-2009, 12:21 AM
  5. Need Sherline Belt & qestion on X2 Belt Drive?
    By Oldboy in forum Benchtop Machines
    Replies: 12
    Last Post: 03-06-2008, 07:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •