512,434 active members
5,021 visitors online
Register for free
Login
IndustryArena Forum > Metalworking Machines > Hyundai Kia machine > Hyundai Hit8s with siemens 840c
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Jun 2008
    Posts
    1

    Hyundai Hit8s with siemens 840c

    Hi there.
    Im having big issues with my lathe. Z axis started to judder and alarm out (ORD1 contour monitoring Z). It does this randomly. Now the X is jumping and alarming out when trying to reference (ORD1 contour monitoring X). Our main service company have looked at it numerous times and now washed their hands of it! Anyone got any ideas, ive checked all connections. Any help will be much appreciated.

    Many thanks,

    Marx

  2. #2
    Registered
    Join Date
    Aug 2008
    Posts
    1
    I had this same problem and the tachometer in the servo was bad.

  3. #3

    Join Date
    Mar 2006
    Posts
    194
    Hallo Alger Hallo Marx..
    a have this maschine..
    Sorry m english is not so good..
    a translate you in google traslater..
    ORD ist OrdnungsNumber..
    Bat coming this is not a problemm.. (small-Problemm)
    Make a new DriftAbgleich..
    A say you and you can make it..
    you mst make 611. Driver for Achsen..
    klemme 63,65 und 663 give her 24 Volt..
    the driver has a led.. Yellow must run..! ReglerFreigabe.
    go and make 56 und 64 Sollwert Null a brigde..
    an poti must drehen.. left or right.. you understand.? a hope.!
    __________________________________________________ ____
    okey make all the kabel in originel
    your Achse must zero of zero sein.. in the Monitor.
    Make..
    Softkeys/
    Diagnose/
    Service-Anzeige/
    NC-Service/DriftAbgleich..
    Please press this key 3 mall.. 4 mall..
    ___________________________________
    you look..
    Deine maschin has good and work..
    then If you have questions
    _______________________________________
    My Problemm for this maschin Z has not Tork.??
    a have checked Driver.. (All)
    a make monday morning check the Motor for achse..
    Gruss Demir.

Similar Threads

  1. Siemens 840D/Hyundai 30M Post for Gibbscam
    By atmosports in forum Post Processor Files
    Replies: 23
    Last Post: 03-06-2019, 02:45 AM
  2. Hyundai Hit8s w/siemens840c
    By Johnny9 in forum Hyundai Kia machine
    Replies: 8
    Last Post: 07-26-2016, 02:48 PM
  3. Help with power for Siemens 840C
    By dfstrasser in forum General CNC Machine Related Electronics
    Replies: 1
    Last Post: 05-19-2010, 11:29 PM
  4. help with parametric programming on 840c
    By craigh10 in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 11-10-2009, 08:35 AM
  5. Hyundai SPT-V30
    By kevinkoons in forum Uncategorised MetalWorking Machines
    Replies: 6
    Last Post: 03-03-2008, 04:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •