585,908 active members*
3,782 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Y axis moving without being programmed HMB-1

Thread: Y axis moving without being programmed HMB-1

Results 1 to 2 of 2
  1. 06-17-2008, 09:35 PM #1
    carbidecraters
    carbidecraters is offline Registered
    Join Date
    Apr 2005
    Posts
    1194

    Y axis moving without being programmed HMB-1

    Its a older HBM-1 control and everytime we try a program the Y axis moves out to its limit without any Y move programmed....what the heck? Anyone have a good direction I can try?
    Reply With Quote Reply With Quote
  2. 06-22-2008, 06:51 PM #2
    skullworks
    skullworks is offline Registered
    Send a message via Yahoo to skullworks
    Join Date
    Feb 2007
    Posts
    592
    If its creeping then I'd say it was a gain adjustment on the servo amp .

    If the machine just takes off then you have an open connection between the servo encoder and the amp/cpu rack
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Trade offs between Moving Gantry and Moving Table
    By gregmary in forum DIY CNC Router Table Machines
    Replies: 11
    Last Post: 04-22-2011, 07:48 PM
  2. Mach3 y axis dc servo jumps when moving small increments only.
    By mif73 in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 09-15-2008, 09:32 AM
  3. Moving Table vs Moving Gantry; Dremel vs Router
    By chuckknigh in forum DIY CNC Router Table Machines
    Replies: 32
    Last Post: 03-28-2007, 02:48 AM
  4. Axis are not moving
    By Reef Guy in forum Mach Software (ArtSoft software)
    Replies: 4
    Last Post: 09-14-2006, 02:42 AM
  5. Need PIC programmed
    By randyf1965 in forum CNC Wood Router Project Log
    Replies: 0
    Last Post: 03-27-2005, 12:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules