It depends on the model of your Signal Generator. If you have an older signal generator 401A, then you would need a 9 pin serial port on the computer. However if you have bought in say, the last year, you probably have a 501A USB signal generator, in which case you don't really need anything special.
Here are the minimum requirements for running just the drivers software that operates the table.
Windows 2000/Xp/Vista
Pentium 4 1.6 ghz
512mb ram
1gb hard drive space free
Mike @ Torchmate.com | www.Torchmate.com
Toll Free : (866) 571-1066 M-F 7:30am-4pm PST