Hello, my first post. I have recently purschased a Dyna Mechtronics DM 4400 mill. It is an older but very solid machine with a nice little 10 station tool, holder. However the controls are a bit quirky as it does not use G code. Anyone else out there in the great southern lands with the same machine or with experience on one. I am in Croydon Victoria.
Martin
Thread: DM 4400
Results 1 to 4 of 4
-
07-10-2008, 07:56 AM #1
Registered
- Join Date
- Jul 2008
- Posts
- 49
DM 4400
-
07-10-2008, 08:01 AM #2
Registered
- Join Date
- Sep 2006
- Posts
- 37
Hi
Welcome to CNC Zone
I have seen one of these machines, but afraid I can't help much.
Hope others can be of some assistance.
Nigel
-
07-10-2008, 04:22 PM #3
Gold Member
- Join Date
- Oct 2005
- Posts
- 672
Check out this thread for more info about your machine.
http://www.cnczone.com/forums/showthread.php?t=50787
-
07-11-2008, 10:24 AM #4
Registered
- Join Date
- Jul 2008
- Posts
- 49
Caprirs,
Thank you for you help. I have had a quick look at the thread you suggested and it does look to be very usefull. I shall now go back to it and study in detail.
Martin
Reply With QuoteSimilar Threads
-
Dyna 4400 pst help
By JWWalthall in forum Post Processors for MCReplies: 4Last Post: 12-15-2010, 12:38 PM -
DynaMyte 4400
By echostar in forum DynaCNCReplies: 1Last Post: 05-12-2009, 02:45 PM -
Dynamyte 4400
By olhippiebiker in forum Uncategorised MetalWorking MachinesReplies: 17Last Post: 06-22-2007, 06:08 AM -
Dynamectronics 4400
By Ernie in forum Uncategorised CAM DiscussionReplies: 1Last Post: 08-08-2003, 09:05 AM
Posting Permissions
