584,879 active members*
5,053 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Tool Magzine not Working- Makino MC 86 with Fanuc 15M
Results 1 to 6 of 6
  1. #1
    Join Date
    Jan 2007
    Posts
    93

    Tool Magzine not Working- Makino MC 86 with Fanuc 15M

    I am facing a problem in Makino MC86 with Fanuc 15M controller.
    Magzine is driven by a AC servo motor. Magzine motor not at all rotating.
    In NC/PC screen, parameter list is shown, is have four table missing if compair with healthy m/c.
    Any body know the correct procedure how to initilize the PC data of this particular MAKINO MC86.

    Thanks in anticipation.

    [email protected]

    rajeshunderscore1355atyahoo.co.in
    Attached Thumbnails Attached Thumbnails faulty mc screen.jpg   ok mc screen.jpg  

  2. #2
    Join Date
    Jan 2007
    Posts
    93
    Dear All,
    Is there noboady which can help me / guide me.
    Pl help...................

  3. #3
    Join Date
    Jul 2008
    Posts
    70
    CALL YOUR ELECTRISION HAVE HIM LOOK AT THE SCHEMATICS

  4. #4
    Join Date
    Jun 2007
    Posts
    3757

    Question

    Quote Originally Posted by rajesh_1355 View Post
    Dear All,
    Is there noboady which can help me / guide me.
    Pl help...................
    Sorry. I don't know.
    Did it ever work? If so I would suspect a limit switch stuck/not working.
    Super X3. 3600rpm. Sheridan 6"x24" Lathe + more. Three ways to fix things: The right way, the other way, and maybe your way, which is possibly a faster wrong way.

  5. #5
    Join Date
    Oct 2008
    Posts
    24

    Magzine not working .

    This machine is equipped with Makino Mac to software with fanuc hardware .Atc mag. motor is pmc controlled axis and parameters for this may got currupted,pl confirm that all axis are moving or not as well as apc is working or not and revert back.

    SHREE
    [email protected]

  6. #6
    Join Date
    Jan 2007
    Posts
    93
    Dear SHREE,
    Thanks for reply.
    Now this m/c is working. There is a special method by which PMC controlled axis parameter can be entered in system. I have done it.
    Thanks.
    Now can you help me -- I am working on a m/c LEBLONO MAKINO- FNC 74 with Fanuc OMB controller which have 4 axis.
    I have to disable fourth axis (A- axis on screen ).
    Can you tell me how to disable this. Because when tried to disable by switch on bit in parameter 19. Axis disappear from screen but alarm '436-pulse coder disconnect' was keeps on showing on screen.
    Pl replt.

Similar Threads

  1. Help with Makino FNC 74 tool changer...
    By Sump Cleaner in forum Uncategorised MetalWorking Machines
    Replies: 8
    Last Post: 04-22-2008, 09:08 PM
  2. Makino Fanuc 0-MC
    By DHYSTA in forum Fanuc
    Replies: 0
    Last Post: 04-07-2007, 01:38 PM
  3. Makino Tool Change
    By simoneau in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 03-28-2007, 05:45 PM
  4. Fanuc 11M in Makino MMC
    By mcrosby in forum Fanuc
    Replies: 0
    Last Post: 07-20-2006, 07:22 AM
  5. Makino FTN/ Functional Tool Numbers
    By demule2 in forum Community Club House
    Replies: 1
    Last Post: 04-17-2006, 02:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •