ALARM shuttle drawbar alarm haas
For some reason during a tool change the spindle gets ready to load or unload the tool from the changer and just stops and gets an alarm with the spindle still in the carousel.
i have 100psi air at the regulator but the error mentions the drawbar not releasing.
anyone have any suggestions.
thank you in advance.
tim
2007 Haas TMP-1 Microscribe MX-5 Mastercam X4 Mill Level 3 Surfaces,Solids Seagate 2 tb hard drive AMD 64x2 8gig ram windows ultimate 7 64bit Geoforce 8800 GTX