585,581 active members*
4,095 visitors online*
Register for free
Login

Thread: RFQ Aluminum bending into c channel

Results 1 to 2 of 2
  1. 07-28-2008, 07:34 PM #1
    seansear
    seansear is offline Registered
    Join Date
    Nov 2003
    Posts
    43

    RFQ Aluminum bending into c channel

    I am looking for quote for bending aluminum.

    .090 Alum
    14.5 W
    11 H
    Will be machined and bend lines will be drawn. need 4 bends to make a C channel.

    Close to the midwest, WI preferably

    Bruce
    Bruce
    Reply With Quote Reply With Quote
  2. 07-28-2008, 09:56 PM #2
    jeffery71
    jeffery71 is offline Registered
    Join Date
    Aug 2003
    Posts
    73
    If you only need one of these it would probably be best to get someone local. Check with local welding/fabrication shops there should be one that would do this for very little money.



    Jeff T.
    http://www.3dcarvestudio.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Bending Aluminum Pipe in small radius
    By gcamlibel in forum Bending, Forging, Extrusion...
    Replies: 27
    Last Post: 07-07-2011, 08:23 AM
  2. Store front aluminum channel ?
    By Bzooka in forum Open Source CNC Machine Designs
    Replies: 8
    Last Post: 05-04-2010, 09:40 PM
  3. Bending 1/4" aluminum plate
    By SRT Mike in forum Bending, Forging, Extrusion...
    Replies: 21
    Last Post: 12-04-2006, 03:21 PM
  4. Bending Aluminum Bar
    By energyforce in forum Bending, Forging, Extrusion...
    Replies: 1
    Last Post: 04-12-2006, 05:09 AM
  5. Bending small aluminum rod
    By Twmaster in forum Bending, Forging, Extrusion...
    Replies: 9
    Last Post: 08-07-2004, 01:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules