584,814 active members*
5,085 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2008
    Posts
    2

    Exclamation Where is the "start from line"

    Hi.
    I've downloaded the latest emc2 version, 2.2, but I can't find the option "start from line" in the axis interface. Was it taken off? Is it a problem in my machine ini file?
    hank's in advance.

  2. #2
    Join Date
    Apr 2007
    Posts
    56
    I've only had 2.2.2 or newer and I've not run across a command like that.

    It sure would be handy to have though.

    Bill K.

  3. #3
    Join Date
    May 2006
    Posts
    2420
    If you have your gcode loaded, select the line you want to start from and then go to the machine menu (top left of screen) and select "set next line" from there, then you just hit the "play" button and off it goes.

    Cheers.

    Russell.

  4. #4
    Join Date
    Jul 2008
    Posts
    2
    Thank's epineh.
    Now its working.

  5. #5
    Join Date
    May 2006
    Posts
    2420
    No problem, good to hear it is working

    Russell.

Similar Threads

  1. "low end" HF Spindle or "high end" router for about $1000?
    By biomed_eng in forum DIY CNC Router Table Machines
    Replies: 14
    Last Post: 01-06-2012, 07:15 AM
  2. Lets Start 3-axis "khattak Mill"
    By Khalid in forum CNC Wood Router Project Log
    Replies: 46
    Last Post: 01-14-2011, 11:37 AM
  3. 4020 fadal cant get past "Cold Start"
    By chipsahoy in forum Fadal
    Replies: 13
    Last Post: 03-08-2006, 01:29 AM
  4. "Fancy" single line font
    By DAB_Design in forum G-Code Programing
    Replies: 20
    Last Post: 04-25-2005, 09:04 PM
  5. How to do 2 "IF" statements on the same line?
    By murphy625 in forum CamSoft Products
    Replies: 14
    Last Post: 04-02-2005, 02:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •