I have two yasda ybm640v cnc jig bore machines. I would like to orientate the spinde every 90 deg. Does anyone know what m or g code does this. I have a fanuc 16i-m control.
I have two yasda ybm640v cnc jig bore machines. I would like to orientate the spinde every 90 deg. Does anyone know what m or g code does this. I have a fanuc 16i-m control.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
If you can't index the spindle in more than one index location. You could consider setting 4 tools and holders at the 90 degrees.
For broaching on VMC we set addtional broaching tools for each 90 degrees as needed.
Safety - Quality - Production.
That is my second choice. I think that will be the way to go.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
i reply you after two day by trying on my machine your requirement
i reply you after two days by trying your requirement on my machine
Thank you
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)