584,817 active members*
4,900 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2008
    Posts
    97

    EDITING WITH FANUC LADDER III

    I am writing ladder on Fanuc Ladder iii for a cincinatti FTV 850/1800 with an 18imb control and have run into trouble with inserting a sub timer. It tells me there is not enough room on that line, I also need an coil contact after the timer. I have seen in other ladders where they run one line into the next and have not found the cammand to do so. I have some experience writing for Allen Bradley slic 500s but am finding Fanuc Ladder software to be some what different.

  2. #2
    Join Date
    Mar 2004
    Posts
    32
    The timer needs to be far enough left to fit on the line. I believe you can have 2 contacts before it. Perhaps you could write your logic on another line bringing up one contact to activate the timer.

  3. #3
    Join Date
    Nov 2008
    Posts
    37
    Hello, maybe this link could be useful for Ladder III FAQ http://cncfanuc.blogspot.com

Similar Threads

  1. fanuc-o ladder
    By Bill Clark in forum DNC Problems and Solutions
    Replies: 9
    Last Post: 09-29-2011, 07:35 PM
  2. Ladder editing
    By luca_r in forum Mazak, Mitsubishi, Mazatrol
    Replies: 7
    Last Post: 06-05-2009, 09:02 AM
  3. How to use Fanuc Ladder III on OM
    By Namnp2007 in forum Fanuc
    Replies: 2
    Last Post: 08-06-2008, 05:08 AM
  4. Fanuc ladder
    By guhl in forum Fanuc
    Replies: 3
    Last Post: 12-07-2007, 07:54 PM
  5. Fanuc ladder editing card
    By bob1371 in forum Fanuc
    Replies: 1
    Last Post: 04-10-2006, 04:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •