Hi guys
I've got here an interesting problem with Unigraphics postprocessor for FADAL. It runs ok, except one thing: post puts into programm wrong coordinates of lenth to center of an arc (e.g. G03 X5. Y4. I3. J-2., but should: G03 X5. Y4. I-3 J2
I dont know what to do? mb it was only postbuilder's joke?
Looking forward to getting some help.
Thread: UGS NX Post for Fadal
Results 1 to 4 of 4
-
08-19-2008, 02:35 PM #1
Registered
- Join Date
- Aug 2008
- Posts
- 6
UGS NX Post for Fadal
-
08-19-2008, 04:37 PM #2
Registered
- Join Date
- Feb 2008
- Posts
- 92
can you send me your post and I can look at it?
If you send me a part file, program and the post I can fix it.
-
07-28-2011, 02:29 PM #3
Registered
- Join Date
- Jul 2010
- Posts
- 61
Sorry to bump this older thread, but this is EXACTLY what is happening to me. (i.e. positive and negative need to be reversed both for I output and J output...). Clicking "Mirror I and J output" in Post Builder doesn't reverse the signs, hence wondering whether this was resolved and where in PB the fix was.
Thanks.
-
10-05-2018, 06:12 PM #4
Member
- Join Date
- Jan 2007
- Posts
- 11
Need post for FADAL NX
Hi, can some one share with my your fadal post to NX please?
Reply With QuoteSimilar Threads
-
Work NC post for Fadal
By Savageson in forum FadalReplies: 7Last Post: 06-26-2008, 09:06 PM -
Need Rotary Post For Fadal
By Cappy in forum GibbsCAMReplies: 1Last Post: 01-17-2007, 02:43 PM -
Fadal post
By Nimrod in forum Post Processors for MCReplies: 2Last Post: 01-14-2004, 10:50 PM
Posting Permissions
