[edmondyjh]

I GOT 3 UNITS OF OKUMA OSP-U10L MACHINE. WHAT SOFTWARE DO I NEED TO PROGRAM THE MACHINE USING THE RS232?

[sertec]

I sell Software which will allow you to upload and download programs from the CNC without having to go to the computer. If your interested please contact me on
[email protected]

[Goldorak]

every software should do the job, just get the right settings

we use DNC-max , work really well

but if you want to run okumas on DNC mode you got to have the DNC-B card option on the control

[sertec]

Not All software will do the job efficiently. Also I don't know of any other software that will do DNC-B CORRECTLY( that is all operations are done at the control - you Never have to got to the PC )

[Goldorak]

Not All software will do the job efficiently. Also I don't know of any other software that will do DNC-B CORRECTLY( that is all operations are done at the control - you Never have to got to the PC )

"efficiently" is the magic word

[phx]

Not All software will do the job efficiently. Also I don't know of any other software that will do DNC-B CORRECTLY( that is all operations are done at the control - you Never have to got to the PC )

i used the soft that cames from the okuma Seller, since 1986, and i never had to go to the pc, if its on, and the prog started ;-)
Osp can handle the remote at least since the OSP 5000;-)

thats absolute not a news.