584,350 active members*
7,143 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2008
    Posts
    3

    Question Need Integrex Matrix post

    We're doing some work on a brand new Mazak Integrex e500 (Matrix) machine and we don't have a working post yet, to output out CAM tool path. Does anybody have a post for this, or some generic mill-turn post that will output eia format? We need something to use until we can purchase an actual post.
    We do our programming with both NX4 and Esprit, and we can use either postbuilder or ICAM postprocessors.

  2. #2
    Join Date
    Apr 2007
    Posts
    14
    May be a e-410HS II nx postprocessor will work.

  3. #3
    Join Date
    Nov 2008
    Posts
    12
    Did ICAM support you on this post for the integrex?

    If not, please come to the following link and I will be glad to help you.

    http://www.icam.com/html/products/form_bw.php

Similar Threads

  1. G-Post for Integrex 1060
    By massud in forum PTC Pro/Manufacture
    Replies: 3
    Last Post: 12-08-2009, 04:18 PM
  2. Matrix controller
    By fpworks in forum Mazak, Mitsubishi, Mazatrol
    Replies: 7
    Last Post: 12-11-2008, 05:27 PM
  3. matrix issues
    By masonflo in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 04-05-2008, 11:11 PM
  4. Integrex 1060 - Need Post-Processor
    By massud in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 03-12-2007, 01:57 PM
  5. Procam Ii Post For Mazak Integrex
    By BROCD in forum Uncategorised CAM Discussion
    Replies: 9
    Last Post: 02-17-2004, 06:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •