[arzie2000]

I have bought DSP Controller (RZNC-501). I use flash disk to run my U-files. I found out that there is a USB slot at the bottom, I tried to plug it with a usb cable, and windows started to look for the software, but i don't have any software for it. Does anyone have the driver or host program of the RZNC-501? just in case there is one, i think it would be more convenient to use it rather inserting the usb flash disk.

[studiotuzi]

I have bought DSP Controller (RZNC-501). I use flash disk to run my U-files. I found out that there is a USB slot at the bottom, I tried to plug it with a usb cable, and windows started to look for the software, but i don't have any software for it. Does anyone have the driver or host program of the RZNC-501? just in case there is one, i think it would be more convenient to use it rather inserting the usb flash disk.

If you like I can send the program for DSP 0501 and the driver

[pravin_lhr]

Hey can you send me the RZNC-501 DSP controller driver?My Emailis [email protected]

[studiotuzi]

if you like I have the program and the driver

[ncmeinc]

if you like I have the program and the driver

will the driver and program work with the RZthnc-052XSI-070927

if so could you send it to [email protected]

Thanks

[miroxr6t]

if you like I have the program and the driver

hi
i would like these files if u can please
[email protected]

[aliiii]

Please i need the firmware or the software for my dsp rznc-0504hbbc-L30

[Mangeshpatil]

Can send me rznc-0501 setup file

[studiotuzi]

I have a CNC type OAKE 1224 and is no possible to run 22000 rmp now the machine run 10000 rpm , what kind of the machine you have? Can you send me the file to configuration it - [email protected]

[studiotuzi]

tell me the Email and I will sent you the software and drivers

[ncmeinc]

tell me the Email and I will sent you the software and drivers

please send software and drivers for rznc to
[email protected]

Thanks

HARKO

[moodi_coor]

tell me the Email and I will sent you the software and drivers

hello can u please help me,my dsp rzthnc-053xsi-l30 is not working at all,i think it need the host program i have driver up to date usbcam2.2 ,my dsp was chinese i updated the main program to English,the dsp stopped and dosn't display anything at all,i can't control any thing,thank u alot ...my Email: [email protected]

[andre sae]

tell me the Email and I will sent you the software and drivers

hello dear would you like to send me the software and driver? thank you [email protected]

[hako1234]

EVEN I NEED HOST PROGRAM FOR DSP 0501 CONTROLLER... WE ARE HAVING CNC PLASMA MACHINE..

[mareurs78]

Hi! Does anyone has the latest firmware of the DSP or can post the link of the download? Thank you very much!

[moodi_coor]

hello can u please help me,my dsp rzthnc-053xsi-l30 is not working at all,i think it need the host program i have driver up to date usbcam2.2 ,my dsp was chinese i updated the main program to English,the dsp stopped and dosn't display anything at all,i can't control any thing,thank u alot ...my Email: [email protected]

[rodvek]

I need yur help !!
I need the driver for rznc-05
[email protected]
thank you...

[lybras]

i have theRZTHNC-O53XSI DSP if someone have the software and drivers
of this dsp pls help!!!!!my mail is [email protected]
thanks!

[ashraferiyat]

have tha RZNC 0501 DSP if someone have the software and drivers
of this dsp pls help!!!!!my mail is [email protected]
thanks!

Khaleel

[abkar_6809]

Same problem, but i bought a used RZNC 0501 and the package contains two CDs. Both are defected. Please i need at least the software. I have found USBCam2.1 driver. So i need only the software even if demo, i will buy it later.
[email protected]