[Independent CNC]

Does anyone have a list of "G" and "M" codes definitions for this machine that they would be willing to send me?

Independent CNC Programmer
www.ctcn.net/~3kings/
My mission is to share CNC programming innovations for a lifetime.

[fanuservicetech]

What model Fanuc control does this machine have? 04PC? 6M? 16P? etc.

[Independent CNC]

I think it's a 6M.

Independent CNC Programmer

www.ctcn.net/~3kings/

My mission is to share CNC programming innovations for a lifetime.

[cndcnd]

please help
I have problems amada pega 357 04pc
in turn I get system error
We have motherboard
built on and off then comes the turn on
system error
how I can

[cndcnd]

please help
I have problems amada pega 357 04pc
in turn I get system error
We have motherboard
built on and off then comes the turn on
system error
how I can

[Barbwier]

I have the Amada Apelio II 357 on my company but because of same problems with it the MMC program was deleted.

all the CNC parameters are there so the machine is working without problems.

But i need the MMC on the machine for diagonstics and other stuff .

Is there anibody wiling to chare a copy of the MMC for this machine??

[krisik]

With 05 control ?

[Barbwier]

With 05 control ?

the DNC is 04P-C.

[jjjp1980]

I want the circuit diagram for amada pega 357 04PC & how to bypass safety mat in this machine. plz help

[Barbwier]

My Amada machines lost all parameters because of long electric failure and the batteries did not hold.
When the power was restored the Amada machines already had lost everything.

Amada Apelio II 357 05PLA( Combi machine Laser Punch )

Amada Pega 244 04PC ( Punch Machine )

Does somebody have backup parameters for this machines if possible also the MMC parameters.