[mte.jalal]

Dear Friends,

I have a Cinncinat Arrow 750 and 1000, unfortunatly it Arraow 1000 fail to start or may be I don't know how to make it start (I mean to make the axis move). a cnc specialist asked me to bring the electrical drawings but I failed to find them inside the manuals, Does any one has them ?

Thanks,
Jalal

[griz-shop]

what is the control diagram numbers? it should be a number on a tag on the door to the electrical panel on the back of the machine

[mte.jalal]

Dear griz-shop,

I couldn't find any display showing the number.
remember that I want to setup the machine so all documents will be needed.
I'm needing it.

best regards,

[griz-shop]

I understand you need them but untill you have the correct contoll diagram numbers your out of luck i think. do you have any of the parts or electrical books?

[mte.jalal]

griz-shop

unfortunately I don't have any part.

[griz-shop]

well i think i am no use at this point, best i can offer is to call mag cinncinatti and see what they can do for you

[cncatj]

A picture of the electrical control would be helpful/

[mallardfizz]

hello mallardfizz here.just found out about cnczone.have 30 years experience at cincinnati in birmingham ENGLAND.ALL ARROWS , DARTS SABRES LANCERS WERE BUILT IN BIRMINGHAM.If i can help i will.the electrical drawing number for your machine is on a silver plate on the electrical panel door.it is the bottom number and will begin 9120****. let me know what the number is
regards mallard