Is there a parameter that can be edited for the sec/rev. time on a horizontal cnc w/ pallet change.
I have a '94 model Saeilo Mach 3 Horizontal CNC with a Fanuc OM control and a turntable style pallet change. I am about 50 lbs. shy of the maximum weight limit for the tables. My problem is when I program a pallet change that there is so much momentum with the rotation that the whole turntable slams into the rubber bumpers. The book says it should be currently 10 sec/rev. I am setting the machine up for production and I don't think it would be a good thing to keep running the machine as is. I guess worst case, I set up a new fixture but with less parts to hold. I am currently holding 4 parts. 2 per tombstone. I've looked thru the books and did not find any such parameter to change this. Anybody out there have any ideas?