[davide.castro]

Hello

Can any one help me with a 1997 Harrison GE Fanuc Alpha 400 lathe.
It have the alarm ..servo alarm 414, with dip-switch I go to diagnostic and in nº201 it have 00010000 (1 is EXP). I don't have the detail off diagnostics and the parameters can some on help me.

Thanks

Davide

[fanuservicetech]

What model Fanuc control does this machine have? Fanuc 16, 18, 21, 0 ?

[helderacail]

Hello David. I'm also from Portugal, and i have the same machine, with the same problem.
414 detect error on Z and X axis.
Did you already resolve your problem?

Regards
(Cumprimentos)
Helder

[helderacail]

Dear David, did you already resolve your problem.
I have the same problem in a same machine.
Regards

[helderacail]

Dear David,
Do you have the machine parameters?
I don't have it and i need it to check somethings.
Regards
Helder

[Asim Yasin]

Hi I have to use Harrison Alpha 400 cnc lath with GE Fanuc control there is some problem there is 2 alarms saddle guard override and spindal fault detected show on main screen and spindal not working.
I checked all cables and drives that is all OK.and also mail Harrison but no reply and no help me other side.
Plz any body help me I think my machine parameters is lost and I not have parameters so plz any one send me parameters for my machine.

Sent from my A10 using Tapatalk 4