584,879 active members*
5,419 visitors online*
Register for free
Login
Results 1 to 10 of 10
  1. #1
    Join Date
    Sep 2008
    Posts
    22

    problem x axis

    good evening,

    I have a problem with the x-axis when you move in fast moving x only moves with a preview of 495mm/min that only happens in a positive sense

    in advance thank you very much

    jorge

  2. #2
    Join Date
    May 2006
    Posts
    64
    What is your Fanuc model ?
    Your machine is new machine or used machine?

  3. #3
    Join Date
    Sep 2008
    Posts
    22

    MACHINE KIA H50

    FANUC 18MC
    CENTER MACHINING HORIZONTAL
    KIA H50
    MODELO 2000
    4 EJES
    2 PALLETS

    PARAMETERS WILL BE OR ELECTRONIC

  4. #4
    Join Date
    Aug 2006
    Posts
    98
    Jorge,

    Check if the signal X6.5 stay in 1. If yes, the limit switch of reference is active. You need fix that.

    Daniel

  5. #5
    Join Date
    Sep 2008
    Posts
    22

    friend thank

    friend thank you for your response,

    BUT THE TRUTH not know WHERE CAN I SEE THE SIGNAL x6.5

    Thank you in advance

    JORGE

  6. #6
    Join Date
    May 2007
    Posts
    1003
    Try SYSTEM, PMC, PMCLAD, type in X6.5, press Search. Don't know if you need the .5. I am only a lowly lathe programmer.

  7. #7
    Join Date
    Aug 2006
    Posts
    98
    Jorge,

    Like G-codeguy said, this is on way. But there is more one. PRESS SYSTEM > PMC > PMCDGN > STATUS. Type X6.5 and press NO. SRH. And remenber. Hyundai-Kia machines has the ladder open. It´s possible you edit that.

    Good Luck,

    Daniel

  8. #8
    Join Date
    Sep 2008
    Posts
    22

    problem x axis feed rate

    Good morning,

    Friend apology but the truth do not know if I understood.

    is that I am Colombian and I do not speak or write English, but the problem is that the X-axis moves slowly in a positive sense and in the negative moves fast

    because if the solution to that problem is no excuse but to understand

    as publishers that parameter in the machine?


    jorge

  9. #9
    Join Date
    Sep 2008
    Posts
    22

    problem x axis feed rate

    I found this following the path you told me.

    X0006 5
    exdexl
    0

    ME THAT INDICATES THAT?

  10. #10
    Join Date
    Aug 2006
    Posts
    98
    Jorge,

    The limit switch of reference of the X axis are broken. Check that. The signal must stay in 1 when the axis is out of reference position.

    Daniel

Similar Threads

  1. problem x axis
    By jlviloria in forum Hyundai Kia
    Replies: 0
    Last Post: 09-24-2008, 03:28 PM
  2. TC-22 z axis problem
    By gmagnuson in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 03-14-2008, 03:36 PM
  3. z axis problem?
    By automatic in forum Open Source CNC Machine Designs
    Replies: 1
    Last Post: 12-10-2007, 03:04 PM
  4. Z Axis problem
    By studysession in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 05-06-2007, 12:06 AM
  5. z axis problem
    By UMASSREHAB in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 09-29-2006, 11:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •