[piedpipertraps]

I know thi shas been gone over before but I cant find it. I am cutting 11 ga artsy stuff. I use 40 amp tips and get a pretty good cut, but cant seem to get a good cut with fine cut tips. Anybody use metal this thin and 40 amp fine cuts? If so what kind of settings are you running? BTW way I am running a Hypertherm Powermax 1250.

[Jeremy_Wittlock]

I think i remember you guys from the we-cim training at dynatorch (gary is my dad). Anyways, i cut mostly 14 ga cold roll stuff with 40a finecuts. My settings are as follows: setpoint= 93 Feedrate=130 My amperage on the 1250is set at about 32. You should be able to cut pretty decent with those settings if you turn down the feedrate a little(,maybe 100) and increase the setpoint to about 100. You should probably run the plasma inbetween 35-40. Give that a try, and hope for the best lol.

Jeremy WIttlock
Bare Metal Fabrication.

[piedpipertraps]

Thanks Jeremy, I appreciate the reply. I will try that and let you know how it works.
Steven

[Jeremy_Wittlock]

yeah man, no problem. What kind of artsy stuff are you doing? Signage type stuff or like stuff for furniture?

[piedpipertraps]

Mostly signage type stuff like you were doing, yard art, pictures and such. I will try to post some pics so you can see.

[Jeremy_Wittlock]

pretty cool stuff. I believe i helped you draw that texas sign lol. Are you guys staying pretty busy?

[piedpipertraps]

About 6 to 8 weeks behind , not with just the artsy stuff but with everything combined, lol.

[Jeremy_Wittlock]

Well staying busy is good. I,ve been doing a lot of furniture stuff, its pretty fun, a little more interesting than doing signs all the time.